Philips P06 free download

File name P06.PDF

6 109P2 GS3 CM25 OSD Lock Function & Service Mode Go to cover page To lock (disable) OSD function: Access Service mode (burn in mode) : - Press OSD button " " for over 15 seconds to lock the OSD function. Access Service Mode & Burn in mode Release it, then OSD comes on the screen as below. Firstly, get into Factory Adjustment Mode. ATTENTION Push LEFT & RIGHT buttons at the same time for over 15 seconds and release them. CONTROL MENU IS LOCKED The factory message appears at the bottom of the main OSD menu. (for example : 109P V3.08 000601; 00105 is M.T.B.F. in HOUR unit) 00105 To unlock (enable) OSD function: - Press OSD button " " for over 10 seconds again to unlock the OSD function. Release it, then OSD comes on the screen as below. 109P V3.08 000601 Disable/Enable all the WARNING SIGNAL To disable all the WARNING SIGNAL : - Disconnect the Interface cable of the monitor. - Push LEFT & RIGHT buttons at the same time, then power - Disconnect the Interface cable of the monitor (Monitor is ON.). ON. - Press OSD button " " for over 15 seconds to disable all the WARNING SIGNAL. Then release the "OSD" button. - If it is successful, the signal " " - If it is successful, then the signal " NO SIGNAL INPUT "disappeared to comes on the screen later. SERVICE MODE enter power saving-off mode. SERIAL NO: TY 123456 (Background is white.). HOURS : 00021