Sony Ericsson P900 free download

File name 00021-1_FEA209544_85UEN_A.PDF

Created on 10/27/2003 1:44 PM Process Flow, SP/Mechanical Repair Process Flow, SP/ Mechanical Repair Applicable for P900 and 908 Process Flow ...2 1.1 Process Flow Description ...3 2 Process Flow, Label ...4 2.1 Process Flow label, Description ...5 3 Revision History ...6 00021-1/FEA 209 544/85 A ©Sony Ericsson Mobile Communications AB 1(6) Process Flow, SP/Mechanical Process Flow Unit In Arrival Test And Identify Software Fault. No Fault found Fail Trouble shoot Fault not repairable on this level Or cause of failure not found Repair SW/Mechanical Fault not repairable on this level Fai Manual Test SW update to latest revision if needed Next repair level OK Unit Out 00021-1/FEA 209 544/85 A ©Sony Ericsson Mobile Communications AB 2(6) Process Flow, SP/Mechanical 1.1 Box Process Flow Description Reference Unit In Process the phone according to local requirements. Test Instruction, SP/ Mechanical To verify if the product is faulty and confirm the customer's complaint. All test actions must be performed. If the fault is found, continue with Trouble shoot, or if SW fault is reported, continue with Identify Software Fault. Arrival Test Identify Software Fault. Find the software problem according to problem reported from customer. If No SW Fault is found, continue to SW update to latest revision if needed, and Unit Out. Trouble-shoot Trouble Shooting Guide, SP/ Mechanical Determine the cause of the failure. Trouble-shoot the phone according to the guide for the most common faults. Working Instruction, SP/ Mechanical Repair the faulty phone according to the instruction. Replace parts as required. (Product Change Survey, SP/Mechnical) Flashing the latest software into the phone at this point may "repair" some problems. Repair SW/Mechanical Manual Test SW update to latest revision if needed Unit Out Test Instruction, SP/ Mechanical To verify that the phone works, all test actions must be performed. Control the SW revision in the product, update to latest revision if needed. Process and package the phone according to local requirements. If the cause of the failure cannot be found or is not reparable at this level, then send the phone to the next repair level, or return it to the customer at the customer's request. Next repair level 00021-1/FEA 209 544/85 A ©Sony Ericsson Mobile Communications AB 3(6) Process Flow, SP/Mechanical 2 Process Flow, Label Unit In Read the old label Print a new label Use Label Make to print a new label Remove the Old label O

File name 10945-1_FEA209544_85UEN_C.PDF

Product Change Survey Product Change Survey Applicable for P900/P908 Contents 1 Repair overview ...2 1.1 Label content ...2 1.2 Software description...3 1.3 Software revision Latin ...4 Software revision Chinese ...4 1.4 1.5 P900/P908 Markets ...5 1.6 Revision description ...5 Additional Information ...6 2.1 Description of Urban Grey variants...6 Revision History ...9 2 3 10945-1_FEA209544_85UEN_C Sony Ericsson Mobile Communications AB Product Change Survey 1 Repair overview 1.1 Line nbr 1. 2. 3. 4. 5. 6. 7. 8. 2663/x RXX Rywwxx P900 Type FAB-102 1011-BV G1G2G3HY1Y2Y3 35196500-XXXXXX-X ALXXXXXXXX yyWww CDAxxxxxxx Rxx IC: 4170B-FB021011 FCC ID: PY7FAB1021011 9. 10. 11 Line 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. Text Reduced DPY-number, R-state, Repair week, Model name, Additional field (if necessary) Type number, G1,G2, G3, H, Y1, Y2, Y3 field, Additional field IMEI number as bar code IMEI number as characters Serial number as bar code Serial number as characters, production week, CDA number , R-state. Country approval mark 1. Country approval mark 2. Approval mark, angled 90° clw Sony Ericsson trademark, angled 90° clw Marking of origin, angled 90° clw Label content N12878 DPY number: 2663/x. The four last digits and country version. Repair week: If repaired (R), year (Y), week (WW) and R-state (XX) Type FAB-102 1011-BV: Type number. G-field = R-state of the Phone, Organizer and Bluetooth CXC module (SW). H-field = R-state of the KRH (that requires new Type Approval). Y-field = R-state of the KRH, type of ROA and ROA R-state IMEI: 35196500-12345-9: Type Approval Code-phone id-check sum. (Latin version) 35196600-12345-9: - "(Chinese version) Serial number: ALXXXXXXXX : Production code, identifies variant. Factory codes, Flextronics Linkцping A61 Ericsson Beijing CB5 Sony Alsace AL 03W44: Produced 2003 week 44 CDA number: CDA162003/n, identifies language variant. IC: 4170B-FB021011: Canadian country approval FCC ID: PY7FAB1021011: US country approval N12878 Australian country approval 10945-1_FEA209544_85UEN_C Sony Ericsson Mobile Communications AB 2(9) Product Chan

File name 13122-1_FEA209544_85UEN_A.PDF

Part List, Mechanical Part List, Mechanical Applicable for P900 and 908 1 2 3 Exploded View...2 Phone 2 Upper assembly...3 Lower assembly ...4 PCB assembly ...5 Part List ...6 Part list Phone ...6 Part list upper assembly ...6 Part list lover assembly ...7 PCB assembly ...7 Revision History ...8 1 131 22-1/FEA 209 544/85 A Sony Ericsson Mobile Communications AB 1(8) Part List, Mechanical Exploded View The Exploded View is divided in to four different parts, Phone, Upper assy, Lower assy and PCB assy. Phone 131 22-1/FEA 209 544/85 A Sony Ericsson Mobile Communications AB 2(8) Part List, Mechanical Upper assembly 131 22-1/FEA 209 544/85 A Sony Ericsson Mobile Communications AB 3(8) Part List, Mechanical Lower assembly 131 22-1/FEA 209 544/85 A Sony Ericsson Mobile Communications AB 4(8) Part List, Mechanical PCB assembly 131 22-1/FEA 209 544/85 A Sony Ericsson Mobile Communications AB 5(8) Part List, Mechanical 2 Part List This Part List includes all parts possible to replace by using the Mechanical Repair Process. Parts available to order will be found in the Web Shop. Pos. number refers to the Exploded View. Part list Phone Pos. Description 1 2 3 5 6 7 8 9 10 11 13 14 15 16 17 Cabinet upper assy Bezel Front Cabinet lower assy Cap screw (L) Cap screw (R) Stylus Assembly Cap RF Label Battery Lid Assembly PCB assy (No spare part) Flip assembly Flip screw (Nylock M1,4) Screw (1.4*4) Screw (1.7*14.5) Bezel front replacement Part Number SXK 104 0091 SXA 109 3400 SXK 104 0092 SXA109 4440 SXA 109 4441 SXK 104 0096 SXA 109 4435 SVF 930 863 SXK 104 0086 SXK 104 0082 SXA 109 4661 SXA 109 4662 SXA 109 3420 SXA 109 4534 Qty 1 1 1 1 1 1 1 1 1 1 1 2 2 4 1 Part list upper assembly Pos. Description 1 2 3 4 Holder earphone Cabinet upper Sub assy Earphone Cushion earphone Part Number SXA 109 3399 SXK 104 0091 RLE 90 623/3 SXA 109 4438 Qty 1 1 1 1 131 22-1/FEA

File name 13130-1_FEA209544_85UEN_A.PDF

Equipment List, Mechanical Equipment List, Mechanical Applicable for P900 and P908 Contents 1 2 Abstract Repair Equipment, Mechanical 2.1 Sony Ericsson Provided Repair Equipment 2.2 Equipment Provided by Other Suppliers Revision History 2 3 3 5 6 3 131 30-1/FEA 209 544/85 A Sony Ericsson Mobile Communications AB Equipment List, Mechanical 1 Abstract This document describes all the required equipment for the Mechanical Repair Process of the P900 series of mobile phones. Equipment listed without a part number is not orderable from Sony Ericsson and must be bought locally. The matrices in the end of the equipment tables describe where the actual equipment is needed (marked with an X) or may be needed/optional (marked with a Z). Flash upgrade: Manual test: Repair: Equipment for downloading software to the unit, both signalling and test-program. Equipment necessary to perform a manual test. Equipment necessary for replacing components. 131 30-1/FEA 209 544/85 A Sony Ericsson Mobile Communications AB 2(6) Equipment List, Mechanical 2 Repair Equipment, Mechanical 2.1 Sony Ericsson Provided Repair Equipment Flash Upgrade Manual Test Repair Description Torque Screwdriver * Screw bits USB Service Card Reader Service Card Hard lock SonyEricsson programming interfaceSEPI SonyEricsson interface - SEPI Front opening tool Dummy Battery Part Number NTZ 112 459 NTZ 112 1052 LZY 213 1191 LZY 213 595 KRY 105 165 LTN 214 1484 KRY 101 1115 NTZ 112 302/2 BKB 193 149 Comments Adjustable torque X X X USB-Interface incl. SW NEW ! USB Cable to Mobile Phone NEW ! Tool for opening front Z X X X X X *This screwdriver is recommended but not mandatory. Any other screwdriver can be used as long as it is within the specification. 131 30-1/FEA 209 544/85 A Sony Ericsson Mobile Communications AB 3(6) Equipment List, Mechanical NTZ 112 459 LTN 214 1484 KRY 101 1115 NTZ 112 1052 NTZ 112 302/2 LZY 213 1191 LZY 213 595 KRY 105 165 131 30-1/FEA 209 544/85 A Sony Ericsson Mobile Communications AB 4(6) Equipment List, Mechanical 2.2 Equipment Provided by Other Suppliers Flash Upgrade Manual Test Trouble Shoot Repair Description Battery - Battery Charger Blunt Pair of Tweezers Isopropyl Alcohol Cotton Glove Computer USB-Cable Zebra Printer Printer Cable (Zebra) Hot Air Flow Repair Station, Medium. Dentist Hook Operator SIM-card IR-device Bluetooth-device Hands free equipment Headset equipment Comments BKB 193 148/71 ESD-safe To be used when removing glue. ESD-safe IBM compatible Pentium with at least two USB-ports. Type A-B Plug-Plug Cable 90xi, 90xi II or 4000 deluxe Standard RS 232 serial cable [referred to Zebra printer manual] Temperature range 360-380° C. Air-flow up to 9 l/min X To be used to make connection between the phone and the device To be used to make connection between the phone and the device To be used to verify connection in the system connector.Applicable to P900/P908 To be used to verify connection in the phono-jack connector.Applica