File information: | |
File name: | Sony_DV-PS360_Bulletins_for_DVD_Player.rar [preview DV-PS360] |
Size: | 52 kB |
Extension: | |
Mfg: | Sony |
Model: | DV-PS360 🔎 DVPS360 |
Original: | DV-PS360 🔎 |
Descr: | Sony_DV-PS360_Bulletins_for_DVD_Player |
Group: | Electronics > Consumer electronics > DVD |
Uploaded: | 09-03-2004 |
User: | plamensl |
Multipart: | No multipart |
Information about the files in archive: | ||
Decompress result: | OK | |
Extracted files: | 1 | |
File name Sony_DV-PS360_Bulletins_for_DVD_Player.pdf [Sony Service] Technical Services Electronic Service Information Field Problem Reports -----------------------------------------------------------------------FPR Number: Submitted by: Tremble, C. Engineer: TC Model(s): DVPS560D Subject: No part number listed for IC101 Symptom: Last Update: 2001-05-08 Status: Closed Customer Description: Missing Part Number Solution: IC101 Part# 9-885-005-99 Technical Description: No part number is listed for IC1010 in s/m for board SRV940JUC. Schematic is also incorrect in calling IC101 an - ON3131. A ON3131 is an opto isolator. IC101 is drawn as a power control FET type integrated circuit. Part's Information: P/N Description Reference Board Symptom ----------------------------------------------------------------------------------9-885-005-99 SRV940JUC IC101 Sony Service Company National Technical Services A Division of Sony Electronics Inc. Park Ridge, New Jersey 07656 CONFIDENTIAL Service Bulletin Multi-Disc Players No. CSV-5 Model: DVP-S360, DVP-S560D, DVP-S570D, DVP-C660, DVP-C670D 68 Subject: PLAYER MAY NOT PLAY CD/DVD OR VCD Symptom: (111A) Solution: Date: September 8, 2000 The DVD player may not play disc. The display may indicate "No Disc "or C:13:00" Please remove fuse F402 and replace with 0-ohm resistor on MB board (side B). Next, exchange resistors R416 and R418. The original values are 150K, change them both to 82K ohms REF F402 R416/ R418 DESCRIPTION CONDUCTOR, CHIP(2012) METL RES 0H 1/10W RESISTOR,CHIP 82K 1/16W PART NUMBER 1-216-295-11 1-216-844-11 There are 2 types of MB-bds depending on model. DVPS360, Dvps560D, DVPS570D (mb-86) DVPC660, DVPC670D is (mb-87) Reference: HVDK00e007 PRINTED IN USA Multi-Disc Products Service Bulletin No. 68 . 3. Measure the resistor between Pin # 21 & Pin # 22 of the Flexible Cable, which is connected with the OPT. (See the figure below.) If the resistor between Pin # 21 & Pin # 22 is below 6 ohms, replace the OPT to the new one. 4. Please do servo adjustment,after replacing components and/or optical. |
Date | User | Rating | Comment |