Agilent 5989-5587EN SATA II Drive TX RX Testing & Cable SI Testing Using the 86100C DCA-J - Technical Overvi free download

File name 5989-5587EN SATA II Drive TX RX Testing & Cable SI Testing Using the 86100C DCA-J - Technical Overvi

Keysight Technologies SATA II Drive Tx/Rx Testing & Cable SI Test Using the 86100C DCA-J Technical Overview Overview: Table of Contents Serial ATA (SATA) is the latest generation of the ATA internal Cable Testing: storage interface. Due to the inherent limitations of parallel 1. Introduction ... 3 technology, SATA is expected to replace parallel ATA 2. Instrument Setup and Calibration ... 4 everywhere, and expand the use of ATA-based technology in 3. SI-01, Mated Connector Impedance ... 9, 10 the entry server and network storage market segments.1 4. SI-02, Cable Absolute Differential Impedance ... 9, 10 5. SI-03, Cable Pair Matching ...11, 12 The "SATA 1.0" and "SATA II" terminology represent a family 6. SI-04, Common Mode Impedance ... 9, 10 of specifications, while "SATA 1.5 Gb/s" and "SATA 3 Gb/s" 7. SI-05, Differential Rise Time ... 13, 14 references indicate products and their supported speeds that 8. SI-06, Intra-Pair Skew ...13, 14 were developed under these respective specifications. All 9. SI-07, Insertion Loss ...13,14 products developed underSATA 1.0 have a maximum speed 10. SI-08, Differential to Differential Cross Talk (NEXT) ...12 of 1.5 Gb/s. Productsdeveloped under SATA II can either be 11. SI-09, Inter-Symbol Interference ... 13 1.5 Gb/s or 3 Gb/s. In addition, the SATA II specifications are backward compatible with the SATA 1.0 specification.1 Internal Drive Testing: Many devices are covered by the SATA standard and each 12. Introduction ... 5 device has its own test requirements. The SATA standard 13. Instrument Setup and Calibration ...