Agilent 5991-0439EN N4375D 26.5 GHz Single-Mode Lightwave Component Analyzer - Data Sheet c20140505 [22] free download

File name 5991-0439EN N4375D 26.5 GHz Single-Mode Lightwave Component Analyzer - Data Sheet c20140505 [22].pdf

Keysight N4375D 26.5 GHz Single-Mode Lightwave Component Analyzer Data Sheet General Information Keysight Technologies' N4375D Lightwave Component Analyzer (LCA) is the instrument of choice to test 10G Ethernet, FCx8, FCx10 and FCx16 electro-optical components, with up to 26.5 GHz modula- tion range as well as electro-optical components for 40/100GbE and 100 Gb/s coherent transmission. Modern optical transmission systems require fast, accurate and repeatable characterization of the core electro-optical components, the transmitter, receiver, and their subcomponents (lasers, modulators and detectors), to guarantee performance with respect to modulation bandwidth, jitter, gain, and distortion of the final transceiver. The N4375D guarantees excellent electro-optical measurement performance through NIST traceable factory calibration chain. In addition a unique new calibration concept significantly reduces time from powering up the LCA until the first calibrated measurement can be made. This increases productivity in R&D and on the manufacturing floor. The fully integrated "turnkey" solution reduces time to market, compared to the time-consuming development of a self-made setup. The electrical and optical design of the N4375D is optimized for lowest noise and ripple. In addition, this design makes the accuracy independent of the electrical reflection coefficient. It's the excellent accuracy and repeatability that improves the yield from tests performed with the N4375D, by narrow- ing margins needed to pass the tested devices. NIST traceability ensures world-wide comparability of test results. The advanced optical design together with temperature-stabilized transmitter and receiver ensures repeatable measurements over days without recalibration. Using the advanced measurement capabilities of the network analyzer, all S-parameter related char- acteristics of the device under test, like responsivity, ripple, group delay and 3 dB-cutoff frequency, can be qualified with the new N4375D Lightwave Component Analyzer from 10 MHz to 25.6 GHz. The network analyzer The N4375D LCA is based on the new 2- and 4-port N5222A PNA Series microwave network analyzer with an identical and well known user interface across all Keysight network analyzers. Versions with configurable test set and bias-T integrated in the network analyzer are available. The High RF output power ensures a higher optical modulation index (OMI). This gives you the freedom to change between small signal analysis and large signal analysis of your device under test. True mode balanced measurements are possible with 4-port, dual source network analyzers. 03 Keysight N4375D 26.5 GHz Single-Mode Lightwave Component Analyzer General Information (continued) Key benefits