Tektronix Readme free download

File name Readme.txt

Date: June 1, 2007 Product: TDSPTD - Protocol Trigger and Decode utility Version: v3.1.0 =============================================================== Contents of this Readme File: 1. System Requirements 2. Contents of Distribution 3. New Features 4. Known Problems 5. Installation 6. Macro Files 7. Contact Information =============================================================== 1. System Requirements =============================================================== The TDSPTD application is targeted towards DPO/DSA 70000,DPO7254,DPO7354,TDS7000B/CSA7000B,TDS6000B,TDS6000C series oscilloscopes. DPO/DSA70000 and TDS6000C series instruments with option ST to operate the serial trigger. DPO7000 series instruments with 2.5 GHz or more can operate in decode mode only, with no serial trigger Control. TDS7000B/CSA7000B,TDS6000B series oscilloscopes can operate in decode mode only, with no serial trigger Control. Use of a Keyboard is highly recommended to manage TDSPTD input requirements and to bring it to the foreground if the Oscilloscope Application covers TDSPTD. 2. Contents of Distribution =============================================================== TDSPTD V3.1.0 Protocol and Trigger Decode Software (Option TDSPTD) > TDSPTD executable Macro Files > SATA I.csv > SATA II.csv > PCIE I.csv > PCIE II.csv > FC 1.063.csv (Fibre Channel) > FC 2.125.csv (Fibre Channel) > FC 2.5.csv (Fibre Channel) > FC 4.25.csv (Fibre Channel) > HDI2.csv > SAS I.csv > SAS II.csv > SRIO3125.csv > TB3 Demo0 Step0.csv > TB3 Demo2 Step2.csv > TB3 Demo2 Step3.csv > User 1 Gbps.csv > User 1.25 Gbps.csv > User 2.5 Gbps.csv > User 3.215 Gbps.csv > USER.csv Encoding table > General 8B/10B encoding table 3. New Features =============================================================== TDSPTD V3.1.0 i). Sync Pattern support. ii). Defect Fixes in SATA and PCIE decoding iiI).Synchronize Oscilloscope and PTD views iv). User Defined thresholds for Bit detection TDSPTD V3.0.2 Defect fixes and support for the latest Tektronix DPO products. TDSPTD V3.0.1 Defect fixed for TDSPTD application crash on exit. TDSPTD V3.0.0 Support for DPO/DSA70000 series and DPO7000 series scopes with 2.5 GHz or more bandwidth. TDSPTD V1.1.3 Few defect fixes. 4. Known Problems =============================================================== TDSPTD should be used before running other apps, to setup and condition the trigger system. It should not be run in conjunction with other apps however, and un-reliable operation will be evident if run concurrently with other applications. When TDSPTD consumes all of its five time free trials it may present the user with a warning dialog box which comes up behind the Scope Application, in which case a keyboard and a Alt-Ta