NOKIA NSE8-031 free download

File name NSE8-031.PDF

CONFIDENTIAL 1 (2) Nokia Mobile Phones Service Bulletin No. SB-031/15.02.00 Technical Support, Europe & Africa NSE-8 NEW SERVICE SOFTWARE VERSION 271.01.00 New service software version 271.01.00 has been released for NSE-8 phones. Changes made from version 241.11.00 to version 271.01.00: - Multi SIM Locks handling in Phone Identity dialog improved - Channel numbers editable in TX power side channel tuning - Product specific delay before software reset added. - Support for non continuous SIM lock programming data (France Telecom) - Factory settings are now always done in local mode - Support for ROM-6 added - During flashing user is warned, if FLS-1 licenses are below warning limit - In MCU Self-test's dialog "Failed" text is replaces with more visible "**Failed**" - Cancel selection added to Restore Defaults prompt after flashing - Old GSM and T9 files are deleted before saving user settings during flashing - In Warranty State month zero is no longer accepted - Notices much faster, if SIM is not inserted in SCM edit dialog - Fixed cases where TX power level was not always correct when TX I/O tuning is started. BASE and TEST levels removed from power level selection in TX I/O Tuning dialog - In MCU Self tests dialog fixed power off dialog title - User setting recovery from failed flashing - User settings are tried to write phone a bit harder (retry) - After flashing self-tests testing and flash authority id is retried after reset, if they at first fail - DSP Alive test added after flash - Improvement when flashing with NT (ealier rubbish was written to TESLA.INI during flashing with NT) - Erase limits can be market area specific - Target base level is updated when base level calculation is used while tuning TX power levels - Saving is enabled after calculate, if levels are in order while tuning TX power levels - GoNoGo test interface support added - Improvement to auto lock information displaying - Sleep Test supports multiple tests without closing dialog - User is asked to put power on after power off test in Sleep Test - IMEI and SIM Locks can be set once with Both button in Phone Identity dialog - Check box for manual entry added in Phone Identity