IBM Deskstat 8 Quick Installation Guide v3.0 free download

File name Deskstat 8 Quick Installation Guide v3.0.pdf

IBM storage products Quick installation guide Deskstar 8 AT/IDE Models: DHEA-34331, DHEA-36481, DHEA-38451 Handling precautions Quick installation procedure 1. Do not cover the breather hole! Covering the Note: It is advisable to backup all data before breather hole may result in loss of data. proceeding with the installation. If your system BIOS cannot handle large capacity drives (over 540 MB), you may need to use a disk overlay program such as Ontrack's Disk Manager. The following procedure uses the Ontrack Disk Manager software. Information on obtaining a copy of 2. Do not press on the drive! Do not apply any force Ontrack's Disk Manager can be found on the Web at to the drive during handling or installation. www.ibm.com/harddrive. Setting the jumpers 1. Refer to your computer manual to determine if you require the 15 or 16 head logical architecture. 2. In a one drive system, configure your new drive as Master (Device 0) with no jumpers installed. 3. Always handle the drive with care to prevent 3. In a two drive system, one drive must be desig- damage from shock, vibration, or electrostatic dis- nated as the Master, the other as the Slave (Device 1) charge (ESD). 4. When installing the new drive as a Slave, check 4. Do not open the static-protective bag containing the the Master drive to determine if a jumper change is re- drive until required. Static electricity can damage the quired to indicate the presence of a Slave drive. drive. 5. Consult your manual to see if your computer sup- 5. Turn off and unplug your computer. Remove the ports Cable Select before choosing this option. cover. 39 19 1 I G E C A 6. When installing the drive, touch a grounded, unpainted metal surface with the static-protective package containing the drive for at least two seconds. 40 20 2 H F D B (This drains static electricity from the package and from your body.) 16 hea