DENON Service Bulletin OST-F1415 free download

File name Service Bulletin OST-F1415.PDF

100 Corporate Drive Mahwah, NJ 07430 Service Bulletin No. : OST-F1415 Date: October 17, 2008 _____________________________________________________________ Model: POA-3012CI Subject: Modification of the Firmware via DPMS (Denon Product Management Server). Countermeasure is applicable only upon claim from the customer. Symptom: ADDITIONAL FEATURES: 1) The AMX command "MV" (Multi Volume) that can operate simultaneous 4CH or less "UP/DOWN/direct" is added to "CH Volume". 2) "Remote Maintenance Mode" was made to be able to be operated in Panel Lock. 3) Odd number CH setting was added to the setting of the "BRIDGED" mode. 4) The function of Update Check is added to Firmware Update of the "OPTION SETUP" screen of WEB Page. 5) When "Save" > "Load" is done from WEB Page with Windows Vista, Firmware might not be able to be renewed. (DPMS server connection LOGIN error.) Solution: We modified the firmware. METHOD OF UPDATE via DPMS (Denon Product Management Server) Updating the firmware 1) Connect the Ethernet terminal of the unit to the Network line by Ethernet straight cable. (Don't use Ethernet cross cable.) The connection of the network recommends the Ethernet cable for certain update. 2) Turn on the power of unit. 3) Push "SETUP" button, and "MENU" on the FL Display is indicated. 4) Select "Option Setup" on the FL Display of front panel, and push the "SELECT/ENTER" button on the front panel. 5) Select "Firmware Update" on the FL Display of front panel, and push the "SELECT/ENTER" button on the front panel. ______________________________________________________________________________________ CONFIDENTIALITY NOTICE: The information contained in this document is intended for the exclusive use by DENON Authorized Service Centers and their employees. This document may contain information that is privileged, confidential and may be protected from disclosure under applicable laws and terms of the DENON Service Agreement. Any distribution, disclosure, dissemination or copying of this document and the information it contains is prohibited. No responsibility will be accepted by DENON for any damage, injury or loss resulting from the misuse of the information contained in this document. 6) Select "Update Start" on the FL Display of front panel, and push the "SELECT/ENTER" button on the front panel. 7) Select "Yes" on the FL Display of front panel, and push the "SELECT/ENTER" button on the front panel. 8) When updating starts, the power indicator lights red. 9) "Updating ***" is shown on the display during updating. 10) Once updating is completed, "Updatingcomplete" is displayed. 11) "Latest firmware" is displayed when the firmware is the latest version. 12) If the display reads as shown below, check the settings and network environment, then u