Kyocera SB-2J0-0029-B398 free download

File name SB-2J0-0029-B398.pdf

(Page.1/1) Service Bulletin Ref. No. 2J0-0029 (B398) November 18, 2011 Firmware Upgrade (Engine: Ver. 006.002, 008.002, 005.002) Subject FS-2020_3920_4020DN_08.00.0030_(2011-08-24) Model FS-2020D, FS-3920DN, FS-4020DN Topic The firmware was upgraded as follows. Content of Changes No. Item Details CTL FW 1 Measures against the The toner low detection was changed according to the residual amount 575682 ENGINE erroneous display of since "Toner low" might be displayed right after toner container was "Toner low" message installed. (Indication of "Toner low" message is based on the count where the toner low is regularly detected. However, if the amount of residual toner inside the toner container is high, the count to show this message will be increased in order to stabilize the toner low detection.) 2 Change of the SC5100 The SC5100 error detection was changed to the same manner of the 571970 ENGINE error detection conventional models. The message "Replace toner" may appear if toner inside the developer unit is clustered on one side because of move of the machine or due to detachment/attachment of the developer unit for jam clearance even after the engine firmware was upgraded. In this case, however, the message can be cleared by closing the top cover after once opening it or turning the power OFF and ON. Check Status Current Program No. Ver. Remark SUM Date Ver. SYSTEM 2J0_3000008009 efd8 008.009 2011/8/24 - New upgrade ENGINE 2J0_1000006002 9124 006.002 2011/10/21 005.001 FS-2020D New upgrade ENGINE 2J1_1000006002 A563 006.002 2011/10/21 005.001 FS-3920DN New upgrade ENGINE 2J2_1000008002 3D73 008.002 2011/10/21