File information: | |
File name: | gpgen-06.pdf [preview gpgen-06] |
Size: | 15 kB |
Extension: | |
Mfg: | CANON |
Model: | gpgen-06 🔎 gpgen06 |
Original: | gpgen-06 🔎 |
Descr: | CANON Copiers GP 605 ServBull Jp_gen gpgen-06.pdf |
Group: | Electronics > Office equipment > Copiers |
Uploaded: | 28-03-2022 |
User: | Anonymous |
Multipart: | No multipart |
Information about the files in archive: | ||
Decompress result: | OK | |
Extracted files: | 1 | |
File name gpgen-06.pdf Canon SERVICE BULLETIN COPIER Issued by Canon Europa N.V. No.: GP-GEN-006 Model: GP55-30/GP200/GP215 (98SQE-B0004) DATE: 30.01.98 LOCATION: Windows95 PostScript Printer Driver v1.0 SUBJECT: New Release (English) 1. Outline GP55-30/GP200/GP215 Windows95 PostScript Printer Driver v1.0 was released. This printer driver is a customized driver for GP series based on Adobe PS 4.1.1. 2. Main Remaining Problems and Restrictions For more detailed information, please refer to the README file that comes up with the driver. 1) Operations of On and Off in the "Installable Options/Refine" settings on the [Device Options]Tab are opposite of the selected setting. [Problem] When Refine is set to On, the data of when Refine is set to Off is transmitted by the MDC Command. Conversely, when Refine is set to Off, the data of when Refine is set to On is transmitted by the MDC Command. [Countermeasure] To be deferred 2) Driver Setup - the backward button does not appear to cancel the setting of the driver's name [Problem] Selecting the appropriate driver and the Next button during installation, then using the Back button to go back and change the selection (i.e. from GP PostScript to GP200/215 PostScript) and again selecting the Next button, the Setup does not appear to retain the new driver settings (the driver's name). In the other words, the previous selection remains in the Setup box. When you continue the installation, it is possible to end up with the driver name not matching the driver actually installed. [Cause and Countermeasure] To be deferred, since the user can change a printer name after installing the driver. 3) The Network Interface Board-E3e/E2e cannot operate with the Automatic Configuration mode when it is using NDS mode. [Cause and Countermeasure] Limitation as per the NIB board specification. The users should use Bindery mode or disable the Automatic Configuration. -1/2- GP-GEN-006 3. Combinations of ROMs 1) GP200/215 Series GP200/215 IP Ver.45.02 and later D-CON Ver.35.04 and later PRCON Ver.7.01 PS/PCL Ver.4.01 PCL5e Ver.4.01 NIB-E3e Ver.2.24 2) GP55/30 Series GP55F MMI Ver.50.18 MDC NCORE |
Date | User | Rating | Comment |