Kyocera AS-118 free download

File name AS-118.pdf

1/2 Service Bulletin SB Number: SB AS-118 Issue Date: 01/03/2003 Subject: Firmware upgrade (for KM-6330 support) Model: DF-600 / 610 (KM-4530 / 5530, KM-6330) Please be informed that the firmware for the DF-600 / 610 has been upgraded as follows. CONTENTS OF CHANGES 3B829524F 5G Item Remarks 1 Malfunction when both front and rear staple If both front and rear staple cartridges are empty and one of these two cartridges are empty. cartridges is exchanged with a full one, the empty status for the remaining empty staple cartridge is not detected anymore and user does not know the one remaining cartridge needs to be filled. 2 Paper misalignment when ejected paper is Phenomenon stacked on main tray. When A4 or letter size paper is stapled askew at one or two positions, the ejected bundle may not align properly. Correction The `OFF' timing of the `SOLENOID, EJECT GUIDE' has been changed from 80 msec. to 200 msec. after eject switch is turned on. 3 Mylar of ejection guide in contact with paper When B4 size paper is moved for stapling, the paper edge may catch edge when B4 size paper is moved for stapling. behind the ejection guide mylar. Correction When B4 size paper is stapled askew at one position on front or rear, the length of moving is changed from 15 mm. to 18 mm. 3B829525G 6H KM-6330 support: when installing DF-610 in KM-6330, please use this software version! 4 Staple error at 2 points binding Phenomenon In case of 2 locations stapling, the 2nd location is stapled 100 msec. after the 1st staple. The 2nd staple may break however due to an incomplete stapling process because the timing of 2nd stapling is during the peak of electric current (from staple motor). Correction Software has been changed so that the 2nd point is stapled 200 msec after the 1st point is stapled. 5 Paper jam occurs in feed-in