File information: | |
File name: | CS480_10.pdf [preview CS480 10] |
Size: | 176 kB |
Extension: | |
Mfg: | LG |
Model: | CS480 10 🔎 |
Original: | CS480 10 🔎 |
Descr: | LG Monitor SW44I(480) CS480_10.pdf |
Group: | Electronics > Computer equipment > Monitors |
Uploaded: | 12-05-2022 |
User: | Anonymous |
Multipart: | No multipart |
Information about the files in archive: | ||
Decompress result: | OK | |
Extracted files: | 1 | |
File name CS480_10.pdf DISASSEMBLY 1. TILT/SWIVEL REMOVAL 3. TOTAL CHASSIS ASSEMBLY REMOVAL Set the monitor faces bottom Disconnect P903 (Degaussing pin) and P701 Pressing the latch , carefully remove the (DY pin). Tilt/swivel by pulling it upward. Remove two screws from the Main Bracket to separate it from the Front Cabinet. Main Bracket 2. BACK COVER REMOVAL 4. CRT BOARD ASSEMBLY REMOVAL Remove four screws from the Back Cover. Remove four pins . Slide the Back Cover away from the Front Remove CRT earth connector Cabinet of the monitor. Carefully separate the CRT Board Assembly from the CRT neck. Discharge the remaining static electricity by shorting between the Anode Cap and the CRT ground. Disconnect the Anode Cap from the CRT. CRT Assembly Anode Cap -9- 5. BOTTOM BRACKET REMOVAL 6. MAIN BOARD ASSEMBLY REMOVAL Remove three screws . Remove three screws . Remove the Bottom Bracket. Remove the screw . Remove five screws . Release three latches from the Main Board Assembly. Main PCB Assembly Bottom Bracket Main Bracket - 10 - |
Date | User | Rating | Comment |