File information: | |
File name: | Service Bulletin OST-F1206.PDF [preview Service Bulletin OST-F1206] |
Size: | 39 kB |
Extension: | |
Mfg: | DENON |
Model: | Service Bulletin OST-F1206 🔎 |
Original: | Service Bulletin OST-F1206 🔎 |
Descr: | DENON DVD Video Player DVD Video Player Denon - DVD-2930 & 2930CI Service Bulletin OST-F1206.PDF |
Group: | Electronics > Other |
Uploaded: | 15-05-2022 |
User: | Anonymous |
Multipart: | No multipart |
Information about the files in archive: | ||
Decompress result: | OK | |
Extracted files: | 1 | |
File name Service Bulletin OST-F1206.PDF 100 Corporate Drive Mahwah, NJ 07430 Service Bulletin No. : OST-F1206 Date: August 8, 2007 _____________________________________________________________ Model: DVD-2930CI Subject: Firmware Correction Symptom: 1) When the "Track Skip Fwd/Rev" button is pushed early two times or more when the CD-DA disc is in PAUSE, "Play" button commands are not accepted. 2) The SACD disc where the DST compression recording was done by the All Repeat function is played. Noise might occur when returning to the first track after the final track at that time. 3) The repeat function was turned on when the SACD disc had stopped and played, or the SACD disc is played with the All Repeat function. Afterwards, the repeat function doesn't operate when stopping and playing. 4) DVD-AUDIO cannot be played. (It is not possible to play at the probability of 0.04% by combining the device key and MKB.) 5) AC-3 protected with CSS is converted in PCM and the SPDIF digital outputs are 24 bits. 6) When the equipment with a non-certificated HDCP output TV is connected with the DVD-3930CI player, the picture is output. 7) When the image of 576i is output, APS of WSS is wrong. 8) A/V Receiver (AVR4308CI etc.) for CEC and the DVD player are connected. The HDMI output of DVD player doesn't go out when "Function switch" of A/V Receiver is selected. 9) The DVD player is set to RGB 480i/576i. When both 2440 |
Date | User | Rating | Comment |