Kyocera 2KZ-007 free download

File name 2KZ-007.pdf

Service Bulletin SB Number: SB 2KZ-007 Creation Date: 19/09/2011 Subject: Firmware upgrade (Firmware Pack V4.01 and V4.00) Model: FS-C8020MFP/8025MFP, FS-6025MFP/6025MFP(B)6030MFP Item Contents 1 Added support for Support for the FMU2.0 (File Management Utility) has been added. FMU2.0 2 SMB error at The Start key may be disabled, when the machine indicates the network start up message start-up. [Please wait. Network starting] at the Operation panel, while the machine waits until the network is stable. 3 MP tray setting The MP tray size and media type can now be set from the Paper selection display after out-put setting. setting out-put to the MP tray. Previously this could only set from the System menu. 4 Added option to The Video memory may not be enough, when scanning originals with a poor increase memory SRLE compression rate. Therefore the option to increase the Video memory has been for the copy. added. Please note that conventional memory allocation is also available. (Only for the FS-C8020MFP/ Conventional behavior 8025MFP) Scan Page Priority (Sort Memory: 222.00MB / VideoMemory: 200.25MB) Default Scan Size Priority (Sort Memory: 118.25MB / VideoMemory: 304.00MB) The Scan Page Priority is selected as conventional behavior after upgrading the Firmware. The setting should be changed after restarting the system. The main memory can be set as follows: Operation panel: System menu System Main Memory Command Center: Top display Basic Device Defaults Main Memory 5 SMTP The SMTP authentication error may occur, when an E-mail is sent, without setting the authentication authentication to SMTP authentication server. error When this error code is displayed at the Command center , the code may not match with the error code displayed at the Operation panel. Command Center: Error 0x8009 Operation panel: Send Error 3101 New condition: Command Center Error 0x8009 has been changed to Send Error 3101 6 Change of the The message "Press [Resume All Print Jobs]" may appear at the upper part of the main pause message Copy screen, when pressing the [Pause All Print job] key at the status display. The above mentioned message has been changed, to indicate where to press the key in order to resume the print jobs. New message: "Press [Resume All Print J