Samsung 05 Adjustment free download

File name 05_Adjustment.pdf

4 Alignments and Adjustments 4-1 General Alignment Instuction 1. Usually, a color TV-VCR needs only slight touch-up adjustment upon installation. Check the basic characteristics such as height, horizontal and vertical sync. 2. Use the specified test equipment or its equivalent. 3. Correct impedance matching is essential. 4. Avoid overload. Excessive signal from a sweep generator might overload the front-end of the TV. When inserting signal markers, do not allow the marker generator to distort test result. 5. Connect the TV only to an DC power source with voltage and frequency as specified on the backcover nameplate. 6. Do not attempt to connect or disconnect any wire while the TV is turned on. Make sure that the power cord is disconnected before replacing any parts. 7. To protect aganist shock hazard, use an isolation transform. LW15M13C/LW17M11C 4-1 4 Alignments and Adjustments 4-2 Factory Mode Adjustments 4-2-1 Entering Factory Mode 1. To enter "Service Mode" Press the remote -control keys in this sequence : - If you do not have Factory remote - control - If you have Factory remote - control 4-2-2 Factory Mode Tree 128 80 Service-TV 128 80 Vi d e o A d j u s t 126 80 Check Sum : 0000 255 FF 255 FF 2F 255 FF Current Control_fix T- M U S P E U - 2 0 0 2 40 28 2003-09-21 PM 04:00 42 2A 63 3F 0 00 Vi d e o R e c a l l Tint 4-2 LW15M13C/LW17M11C 4 Alignments and Adjustments LW15M13C/LW17M11C 4-3 4 Alignments and Adjustments Memo 4-4 LW15M13C/LW17M11C