IBM Deskstar 40GV & 75GXP Quick Installation Guide v2.0 - English free download

File name Deskstar 40GV & 75GXP Quick Installation Guide v2.0 - English.pdf

IBM storage products IBM Quick installation guide Deskstar 40GV & 75GXP Ultra ATA/100 Models: DTLA-305010 DTLA-372015 DTLA-305020 DTLA-307020 DTLA-305030 DTLA-307030 DTLA-305040 DTLA-307045 DTLA-307060 DTLA-307075 System requirements for Ultra ATA/100 Quick installation procedure Y 40 pin, 80 conductor cable IMPORTANT: Back up all data before beginning installation! Y A contoller card or motherboard chipset with Ultra 1. Turn off your computer system. ATA/100 capability 2. Remove cover as instructed by your computer Y Ultra ATA/100 compatible BIOS system manual. 3. Discharge static electricity per handling precautions. If you do not have the above components, your drive 4. Unplug your computer. will function but at speeds lower than 100 MB/second. 5. Note mounting position of existing drive(s) and cable(s). If replacing a drive or cable, remove it. Handling precautions 6. Remove drive from ESD bag. 7. Record model, part, and serial number for future Y Set the drive down gently to prevent damage from reference. impact or vibration. 8. Refer to the diagram below to set the required Y Do not open the ESD bag containing the drive until jumpers. needed. Y If the drive will be the only drive on a cable or the Master drive on a two-drive cable, leave the Y Handle the drive carefully by the edges. Do not jumpers as set at A-B and G-H for 16 head logical touch the exposed printed circuit board or any architecture. The jumpers are factory-set to electronic components. Master-16 heads. Y Do not press on the top or bottom of the drive. Y If the drive will be the Slave drive on a two- drive cable, set the jumpers at A-B and C-D for