IBM Deskstar 5 Quick Installation Guide v3.0 free download

File name Deskstar 5 Quick Installation Guide v3.0.pdf

IBM storage products Quick installation guide Deskstar 5 AT/IDE Models: DHEA-34330, DHEA-36480 Handling precautions Quick installation procedure 1. Do not cover the breather hole! Covering the Note: It is advisable to backup all data before breather hole may result in loss of data. proceeding with the installation. If your system BIOS cannot handle large capacity drives (over 540 MB), you may need to use a disk overlay program such as Ontrack's Disk Manager. The following procedure uses the Ontrack Disk Manager 2. Do not press on the drive! Do not apply any force to software. Information on obtaining a copy of Ontrack's the drive during handling or installation. Disk Manager can be found on the Web at www.ibm.com/harddrive. Setting the jumpers 1. Refer to your computer manual to determine if you require the 15 or 16 head logical architecture. 2. In a one drive system, configure your new drive as 3. Always handle the drive with care to prevent damage Master (Device 0) with no jumpers installed. from shock, vibration, or electrostatic discharge (ESD). 3. In a two drive system, one drive must be designated 4. Do not open the static-protective bag containing the as the Master, the other as the Slave (Device 1) drive until required. Static electricity can damage the 4. When installing the new drive as a Slave, check the drive. Master drive to determine if a jumper change is re- 5. Turn off and unplug your computer. Remove the quired to indicate the presence of a Slave drive. cover. 5. Consult your manual to see if your computer 6. When installing the drive, touch a grounded, supports Cable Select before choosing this option. unpainted metal surface with the static-protective package containing the drive for at least two seconds. (This drains static electricity from the package and from 39 19 1 I G E C A your body.) 7. Handle the drive carefully by the edges. Do not touch 40 20 2 H F D B any exposed printed circuit board. 8. Save the drive packaging material including the ESD bag in the event that the drive must be returned.