Kyocera SDU20C02 free download

File name SDU20C02.PDF

Chapter 2 Maintenannce Contents 2.1. Introduction, 2-2 2.2. Disassembly procedures, 2-3 2.2.1. Removing the duplexer from the printer, 2-3 2.2.2. Removing the duplexer drawer, 2-4 2.2.3. Removing the top rear cover, 2-5 2.2.4. Removing the top cover assembly, 2-5 2.2.5. Removing the drive gear assembly, 2-6 2.2.6. Removing the passage assembly, 2-6 2.2.7. Removing the passage base, 2-7 2.2.8. Removing the guide plate assembly and guide plate B, 2-8 2.2.9. Removing the adjuster assembly, 2-8 2.2.10. Removing the adjuster assembly, 2-9 2.2.11. Removing the front cover assembly, 2-10 2.2.12. Removing the front guide assembly, 2-11 2.2.13. Removing the pickup roller assmbly, 2-11 2.2.14. Removing entrance guide B, 2-12 2.2.15. Removing the entrance guide assembly, 2-12 2.2.16. Removing the clutch feed drive, 2-13 2.3. Cleaning procedure, 2-15 2.4. Adjustment, 2-16 2.4.1. Jig to be used:, 2-16 ] 2-1 2.1. Introduction This chapter explains the following subjects: Section 2.2. Disassembly procedures on page 2-3 explains the disassembly procedures, showing pictures, required to replace parts in the duplexer. Sec- tion 2.3. Cleaning procedure on page 2-15 explains procedures for cleaning those parts which reqruire periodic cleaning. Section 2.4. Adjustment on page 2-16 is for instructions on adjustments. Note that the duplexer requires no lubrication at any of its parts. 2-2 2.2. Disassembly procedures This section provides procedures for disasembly of the duplexer. When replacing parts for which there is no specific procedure described in this sec- tion, refer to the exploded view shown in chapter 4. Before proceeding with disassembly, be sure to read the notes below.