Hitachi Deskstar 180GXP Quick Installation Guide v1.1 free download

File name Hitachi Deskstar 180GXP Quick Installation Guide v1.1.pdf

Quick installation guide Hitachi Deskstar 180GXP Ultra ATA/100 Hard disk drive Models: IC35L030AVV207 IC35L060AVV207 IC35L090AVV207 IC35L120AVV207 IC35L180AVV207 System requirements for Ultra ATA/100 Quick installation procedure If you do not have the components listed below, your Note: Back up all data before installing drive! drive will function but at speeds lower than 100 MB/s. 1. Turn off the computer. 40-pin, 80-conductor cable 2. Remove the computer cover as instructed by the computer system manual. A controller card or motherboard chipset with Ultra 3. Discharge static electricity (see Handling pre- ATA/100 capability cautions). Ultra ATA/100 compatible BIOS or driver 4. Unplug the computer. 5. Note the mounting position of existing drives and cables. If you are replacing a drive or any cable, Handling precautions remove it now. 6. Remove the drive from the ESD bag. Set the drive down gently to prevent damage from 7. Record the model, the part number, and the serial impact or vibration. number of the drive for future reference. Do not open the ESD bag containing the drive until 8. Insert the required jumpers. Refer to the jumper needed. block diagram below. Handle the drive carefully by the edges. Do not