Kyocera SB-2LY-0005-C284 - Изменения конструкции free download

File name SB-2LY-0005-C284 - Изменения конструкции.pdf

(Page.1/5) Service Bulletin Ref. No. 2LY-0005 (C284) October 23, 2012 Conformity to the ErP Lot6 (Change of the Main Power Switch Subject and the Control PWB, Firmware Upgrade) --- For KDE, UTAX/TA and Olivetti only FS-1120D_FS-1320D_05.00.0010_(2012-06-21) Model FS-1120D, FS-1320D l: KMC's Classification Entire Stock Rework In-Field modification at next visit In-Field modification by case No modification necessary Field Measure: When replacing the parts in the machine conforming to the ErP Lot6, please make sure to use the parts conforming to the ErP Lot6. As for the current models, please use the old parts except the left cover (No.1) and the control PWB (No.12). (Both of the new and the old parts of No.1 and No.12 can be used.) (*) Please note that the error may appear or operation failure may occur if the parts in the wrong combination are applied. For more details, please refer to [Operation list] on the page 3. Serial Nos. of the Affected Machines: Please refer to the page 4. Topic In order to conform to the power consumption requirements during standby and OFF modes (Energy related- Products Lot6) in EU countries, the main power OFF timer function (Note 1) was added by changing the main switch, the control PWB and the neighboring parts and by upgrading the firmware. (For more details, please refer to the following pages.) (Note 1) It is a new function to automatically turn the main switch OFF after passing the certain time since the last use of the machine. The new product codes and the serial numbers were newly set up for the models with the main power OFF timer function in order to conform to the ErP Lot6. (Please refer to the last page.) Content of Changes Exterior change: The following changes were made to relocate the main power switch from the machine left rear side to the front of the right cover. Also, the switch was changed from the primary to the secondary power control. - Left cover side : The space was filled and the CONN. CORD ASSY was changed due to disuse of the main power switch. - Right cover side: The KEY POWER was added, the right cover was changed, and the parts such as the holder were added. Inner change: - Right frame: The shape was changed in order to add the MOUNT PWB SW. - The MOUNT PWB SW and the other parts such as the switch were added. - Control PWB: The DC/DC converter was changed and the circuit breaker, et