CANON acc-147 free download

File name acc-147.pdf

Service Bulletin COPIER Issued by Canon Europa N.V. Model : Finisher D1 No.: Acc-147 Rev. 1 (FF-T01-W-000049-02) DATE: 10.08.99 Location : BUFFER ROLLER ASSEMBLY Subject : ALIGNMENT FAULTS (DURING WRAPPING ON BUFFER ROLLER) Reason : An alignment fault can occur during staple sorting if the degree of wrapping of paper on the buffer roller is not appropriate, and the problem can be corrected by providing the measures shown herein during servcing work. Details : An alignment fault can occur in sheets delivered after stapling by the sorter. If the degree of wrapping of paper on the buffer roller is not appropriate, the resulting displacement of sheets will lead to misalignment during stapling operation. The work rules imposed on the factory are now being imposed strictly, and additional work (i.e., checking adjustment values) has been added. Servicing : < Making Checks and Making Adjustments > 1. Turn off the power, and set the DIP switch (SW103) on the finisher controller PCB as shown in Figure 1. 2. Set the copier so that the copy count is '2' and sort mode is selected; then, place three originals. 3. Press the Copy Start key.