Kyocera 2LW-010 free download

File name 2LW-010.pdf

Service Bulletin SB Number: SB 2LW-010 Creation Date: 18/11/2011 Subject: Zigzag ruled lines in the sub-scanning direction Model: FS-3040MFP/3140MFP/3040MFP+/3140MFP+/3540MFP/3640MFP Phenomenon Zigzag ruled lines may appear in the sub-scanning (Vertical) direction. Cause This is due to contact failure between the heat roller bearing and the ground plate of the Fuser unit. Solution The ground plate (Plate earth fuser) has been changed as follows: 1. The material has been changed (Hardened) from SUS 304CSP1/2H to SUS 304CSPH 2. The shape (Angle) has been changed. Abnormal image sample There should be no gap between the heat roller bearing and the ground plate of the Fuser unit. Bearing Old condition New condition: The angle has been changed to improve the contact with the bearing. 45