Kyocera SB-3KF-0003-C313 free download

File name SB-3KF-0003-C313.pdf

(Page.1/2) Service Bulletin Ref. No. 3KF-0003 (C313) December 4, 2012 Subject Discharger Brushes Added to the TABLE PAPER Model PF-315, PF-315+ l: (Affected models) PF-315: FS-3900DN, FS-4000DN, FS-3920DN, FS-4020DN PF-315+: FS-2100D, FS-2100DN, FS-4100DN, FS-4200DN, FS-4300DN KDC's Classification Entire Stock Rework In-Field modification at next visit In-Field modification by case No modification necessary Field Measures: When the phenomenon described below occurs, please first replace the PF main PWB (303KF01020) with the new one and then affix the DISCHRAGER TP (No.1) to the indicated positions on rear side of the TABLE PAPER. (After cleaning the affixing part with alcohol, please affix No.1 according to the alignments.) Serial Nos. of the Affected Machines: Please refer to the next page. Topic In a very rare case, static electricity on the TABLE PAPER was short-circuited to the side plate attached the PF main PWB after paper feeding which cause damage to the motor driver IC on the PF main PWB (303KF01020)(*). Therefore, the discharger brushes (DISCHARGER TP: No1) were added to the rear side of the TABLE PAPER to secure the antistatic function. * If the motor driver IC is damaged, the TABLE PAPER cannot be lifted up, which causes no paper feed jam. 1. Two pcs. of the DISCHARGER TP (No.1) were added to the TABLE PAPER. (PF main Positions of the discharger brushes PWB side) TABLE PAPER Brush shall not Rear side of the TABLE PAPER stick out from the metal plate width. Leading edge of the brush base Alignment to the edge of the metal plate Allowable range of stick-out: +2/-0 mm KYOCERA Document Solutions Europe Technical Customer Service Division (TCSD) (Page.2/2) Service Bulletin Ref. No. 3KF-0003 (C313) December 4, 2012 Com pati- Old Part New Part