File name SB-2K3-0019-B293.pdf(Page.1/2)
Service Bulletin Ref. No. 2K3-0019 (B293)
August 26, 2011
Measures against the Toner Container Detection Failure
Subject
(Change of the Engine Board)
Model FS-6030MFP, FS-6025MFP, FS-6025MFP/B
Phenomenon
The toner container is not detected and the message "Check the toner container" appears even though the toner
container is correctly installed.
Cause
The chip capacitor mounted on the toner container detection circuit on the engine board is damaged and therefore,
the toner container is not detected.
Corrective Measures
The constant of the chip capacitor was changed.
Com pati-
Old Part New Part Q'ty bi lity
No. No. No. Description Remarks
Old New Old New
302K394040 302K394040 PARTS PWB ENGINE ASSY
1 1 1 X O *1
2K394040 2K394040 SP
*1: The part already shipped out is all corrective one while the part number remains unchanged.
KMC's Classification Entire Stock Rework In-Field modification at next visit
In-Field modification by case No modification necessary
Field Measure:
Please replace the engine board with the new one when the phenomenon described above occurs.
Serial Nos. of the Affected Machines: Please refer to the next page.
KYOCERA MITA Europe B.V.
European Service & Development Center (ESDC)
(Page.2/2)
Service Bulletin Ref. No. 2K3-0019 (B293)
August 26, 2011
[Serial numbers of the affected machines]
FS-6030MFP
KMA 120VI KMBR CPY KMA 220VI KME UTAX Olivetti
1102K32US0 1102K32BR0 1102K32CS0 1102K34US0 1102K33NL0 1102K33UT0 1102K33LV0
Q6Q1201816 N8P1200021 N6S1200858 N7T1200071 Q6R1100763 N6C1100363 NCY1300067
KMAUS KMTW KMHG KMID |