Kyocera SB-2K3-0035-C199 free download

File name SB-2K3-0035-C199.pdf

(Page.1/2) Service Bulletin Ref. No. 2K3-0035 (C199) July 19, 2012 Upgrade of the Firmware for the Enhancement Units (ENHANCE Pack Ver. V1.1) Subject FS-6525MFP_FS-6530MFP_v.02.00.0020_(2012-05-21) FS-6025MFP_FS-6030MFP_v05.00.0030_(2012-04-12) FS-C8020MFP_FS-C8025MFP_v05.00.0020_(2012-03-05) Model PF-470, DF-470, AK-470, FAX System (U) (Installation target models) Common models with PF-470, DF-470, AK-470 and FAX System (U) FS-6030MFP, FS-6025MFP, FS-6025MFP/B, FS-C8025MFP, FS-C8020MFP, FS-6530MFP, FS-6525MFP Topic The firmware for the enhancement units was upgraded as follows. Content of Changes No. Item Details MEMO 1 Measures against the When paper in the cassette became empty at the state that 30 or more sheets of DF-470 J6423 jam A4R paper remaining for stapling process at the front side in the processing tray, the paper bundle was not ejected and the paper jam (J6423) might occur even if J6423: DF eject paper the job was cancelled. Therefore, this was corrected. sensor remaining jam - Affected models: FS-C8025MFP, FS-C8020MFP - J6423 occurs due to this cause only when A4R paper is used. 2 Measures against the The line might not be cut off during dialing when pressing the on-hook key on the FAX failure when picking up a operation panel after dialing by the dial pulse setting even if a handset (on-hook) 638226 handset during dial was reseated after picking up the handset (off-hook). - The line is cut off by pressing the on-hook key on the operation panel or by picking up and reseating the handset. - The dial is not correctly sent and becomes busy in the state described above (in case of picking up the handset). So, please try again. 3 Measures against the - Transmission error might appear during the remote diagnostics (Memory Dump FAX transmission error request) in the case of the specific data size. Therefore, this was corrected. 638218 during the remote - The F14D error might appear if printing document from the poling box or the F diagnostics code box during the remote diagnostics (Memory Dump request). Therefore, this was corrected. Type ENHANCE Program No.