Hitachi Deskstar 160 GB free download

File name Hitachi Deskstar 160 GB.PDF

Verkrijgbaar bij: Grafi-Call Computers BV. Leiden Quick installation guide Hitachi Deskstar T7K250 Ultra ATA/133 Hard disk drive Models: HDS722525DLAT80 HDS722516DLAT80 Quick installation procedure System requirements for Ultra ATA/133 Note: Back up all data before installing drive! If you do not have the components listed below, your drive will function but at speeds lower than 133 MB/s. 1. Turn off the computer. 2. Unplug the computer 40-pin, 80-conductor cable 3. Remove the computer cover as instructed by the A controller card or motherboard chipset with Ultra computer system manual. ATA/133 capability 4. Discharge static electricity (see Handling pre- cautions). Ultra ATA/133 compatible BIOS or driver 5. Note the mounting position of existing drives and cables. If you are replacing a drive or any cable, remove it now. Handling precautions 6. Remove the drive from the ESD bag. 7. Record the model, the part number, and the serial Set the drive down gently to prevent damage from number of the drive for future reference. impact or vibration. 8. Insert the required jumpers. Refer to the jumper Do not open the ESD bag containing the drive until block diagram below. needed.