Kyocera SB-5H2-0001-B386 free download

File name SB-5H2-0001-B386.pdf

(Page.1/1) Service Bulletin Ref. No. 5H2-0001 (B386) [Service information] October 28, 2011 Measures against the Paper Jam on the Optional Paper Subject Feeder Model PF-430 (Installation target modes of PF-430: FS-6950DN and FS-6970DN) Topic No-feed jam or accordion jam might occur due to a loose connector. If a paper jam occurs, please check the motor connector and securely insert it if it is loose. Removed cassette (right side) Top cover When removing the top cover, two springs will be found at the both left and PF-430 right sides. Remove the top cover upright while taking care not to lose them. 1) Pull out the cassette. 2) Unscrew four of the screws on the top cover (marked with bold arrows in FIG2 FIG1). 3) Unlatch the both hooks inside (one each on the right and left sides) where Push the hook the cassette was seated (FIG2). to unlatch (same for 4) Remove the top cover. the left side ). FIG1 NG Loose OK Correct connection If the connector is loose or disconnected, a jam may occur KMC's Classification Entire Stock Rework In-Field modification at next visit In-Field modification by case No modification necessary Field Measure: Please check the motor connector if a paper jam occurs on the optional paper feeder. KYOCERA MITA Europe B.V. European Service & Development Center (ESDC)