File information: | |
File name: | C306_SystemError(Fxxx)Outline_Ver.1.04E.pdf [preview C306 SystemError(Fxxx)Outline Ver.1.04E] |
Size: | 71 kB |
Extension: | |
Mfg: | Kyocera |
Model: | C306 SystemError(Fxxx)Outline Ver.1.04E 🔎 |
Original: | C306 SystemError(Fxxx)Outline Ver.1.04E 🔎 |
Descr: | Kyocera Printer FS-2100-4100-4200-4300 ServiceBulletin C306_SystemError(Fxxx)Outline_Ver.1.04E.pdf |
Group: | Electronics > Computer equipment > Printers |
Uploaded: | 07-09-2022 |
User: | Anonymous |
Multipart: | No multipart |
Information about the files in archive: | ||
Decompress result: | OK | |
Extracted files: | 1 | |
File name C306_SystemError(Fxxx)Outline_Ver.1.04E.pdf C306_SystemError(Fxxx)Outline_Ver.1.04E 1/8 FS-4300DN, FS-4200DN, FS-4100DN, No. Content Check procedure & check point Remark 1 FS-2100DN, FS-2100D Check procedure is partly corrected as below. 3) Format the SSD and check function.([Formatting SSD) 4) (Not applicable) 1) Check connection of the harness (Panel to Main board), (Main board to HDD) and [Main - Panel Interface] (Engine board relays) connectors and check function. Main board: YC2 2) Check contact of the DDR memory by detaching and reattaching. and check function. Engine board: YC20, YC17 Lock-up at Welcome/start replace it if available and check function. *User data and installed Panel board: YC1 display (TASKalfa/Ecosys) 3) Format the HDD and check function. (U024 FULL formatting) (*1) software is deleted if - (The display unchages after a 4) Execute the U021Memory initializing to initialize the controller backup memory and executing the U024. [Check the contact with the DDR2 memory] certain time (Note 1: *** check function. |
Date | User | Rating | Comment |