DENON Service Bulletin OST-898 free download

File name Service Bulletin OST-898.PDF

100 Corporate Drive Mahwah, NJ 07430 Service Bulletin No. : OST-898 Date: May 30, 2007 _____________________________________________________________ Model: DVD-3910 Subject: Countermeasure for improving blinking IEEE1394 Indication. Symptom: Under the following condition, the FL Display on the subject model remains blinking and the sound is not outputted. 1) Connect the DVD-3910 to an AV Amplifier that is conformable to the IEEE1394 via the IEEE1394 connection, and set to the IEEE1394 mode. 2) Approximately one second after turning off (standby off or turn off the primary side of the Power supply) the Power of the Amplifier that is conformable to the IEEE1394, turn off the Power of the DVD-3910 so that it turns into the Standby- off mode. 3) The IEEE1394 indication on the FL Display of the DVD-3910 remains blinking and the sound is not output when the Power of the DVD-3910 and the Amplifier that is conformable to the IEEE1394 were switched on. Solution: Corrected the standby-off process-software in the System MICON. Record the supplied file onto a blank CD-R and upgrade your customer's unit upon claim. Supplied Program File: ______________________________________________________________________________________ CONFIDENTIALITY NOTICE: The information contained in this document is intended for the exclusive use by DENON Authorized Service Centers and their employees. This document may contain information that is privileged, confidential and may be protected from disclosure under applicable laws and terms of the DENON Service Agreement. Any distribution, disclosure, dissemination or copying of this document and the information it contains is prohibited. No responsibility will be accepted by DENON for any damage, injury or loss resulting from the misuse of the information contained in this document. Note: