Kyocera PF-022 free download

File name PF-022.pdf

Service Bulletin SB Number: SB PF-022 Creation Date: 22/06/2011 Subject: Abnormal sound from the feed clutch Model: PF-310/430 Phenomenon Abnormal sound may occur, when feeding the paper from the optional paper cassette after replacing the feed clutch. Cause There is a gap between the feed clutch and the fitting position. Under this condition, the side of the gear section at the feed clutch may contact the gear at the right side. (GER-0.8-25-OW) Solution The spacer (Poly slider: Thickness is 0.5mm) has been added between the Bushing (Bush 6P) at the feed clutch, and the stop ring (Clip) to fill the gap between the feed clutch and the fitting position. Old condition of New condition of the feed clutch the feed clutch The Added Spacer (Poly slider) fills the gap between the feed clutch and the gear. Spacer NG: There is a gap OK: There is no gap between the feed between the feed Stop ring (Clip) Bushing (Bush-6P) clutch and the gear. clutch and the gear Parts No. Old Parts New Parts Description Q'TY Interchange- Applicable No. No. ability model(s) Old New Old New 1 305H280850 305H280851 ASY-BKT-MOT 1 1 X O PF-430 5H280850 5H280851 2 305H380400 305H380401 ASY-BKT-MOT 1 1 X O PF-310 5H380400 5H380401 3 305H280551 305H294010 +CLU-ASSY (*1) 1 1 X O PF-310/ 430 5H280551 5H294010 Note *1: The latest CLU-assy contains the set of the feed clutch (Same as before), the spacer and the leaflet with the spacer installation procedure . (See page 2 for a sample of the leaflet) Classification Entire stock rework X In-field modification by case No modification necessary In-field modification at next visit Field measure When the above mentioned phenomenon occurs or when replacing the feed clutch, please add