Kyocera 2K3-017 free download

File name 2K3-017.pdf

Service Bulletin SB Number: SB 2K3-017 Creation Date: 28/02/2012 Subject: Improper page order when printing in duplex Model: FS-6025MFP/6025MFP(B)/6030MFP Phenomenon The page order may not be correct, when ejecting a large volume of duplex print-outs (With the bridge unit attached). Cause Depending on the curled paper in duplex mode, it may push out the page ejecting before it. Solution To prevent paper from being pushed out, a stopper (Parts stopper paper C assy SP_ 302K394860) has been attached to the upper part of the inner tray. Parts stopper paper c assy SP Stopper pulled down (X) Stopper pulled up (Y) Double sided tape Double sided tape Insert the rib at the stopper The stopper should be fixed as part in the gap. shown here. Attaching the stopper Alignment of the stopper Metal plate Metal plate A Cover B Parts stopper paper C assy SP Cover 1. Pull down the stopper (X), when using the 1. Remove the bridge unit. brigde unit. 2. Attach the stopper, and align it according to A 2. Push the stopper upwards (Y), when using and B. the job separator. 3. Pull down the stopper and attach the bridge unit. KMIS Service Department, Kyocera Mita Europe Page 1 of 4 B185 / SB 2K3-017 Service Bulletin Parts No. Old Parts New Parts Description Q'TY Interchange- No. No. ability Old New Old New 1 ---------- 302K394860 PARTS STOPPER PAPER C ASSY SP - 1 - O 2K394860 Classification