File information: | |
File name: | microwave_oven_©_.part1.rar [preview KOT-150S0A, KOT-151S0A, KOT-152U0A, KOT-152C0A, KOT-155S0A] |
Size: | 2145 kB |
Extension: | |
Mfg: | Daewoo |
Model: | KOT-150S0A, KOT-151S0A, KOT-152U0A, KOT-152C0A, KOT-155S0A 🔎 |
Original: | T150S0A003 🔎 |
Descr: | Service Manual Microwave Oven (Feb. 2002) - Part 1/3 - pag. 72 |
Group: | Electronics > Consumer electronics > Microwave Ovens |
Uploaded: | 30-11-2006 |
User: | salvacolnome |
Multipart: | 0 1 2 |
Information about the files in archive: | ||
Decompress result: | OK | |
Extracted files: | 1 | |
File name KO T152UBW.pdf S/M No. : T150S0A003 Service Manual Microwave Oven Model: KOT-150S0A KOT-151S0A KOT-152U0A KOT-152C0A KOT-155S0A DAEWOO ELECTRONICS CO., LTD. http : //svc.dwe.co.kr Feb. 2002 PRECAUTIONS TO BE OBSERVED BEFORE AND DURING SERVICING TO AVOID POSSIBLE EXPOSURE TO EXCESSIVE MICROWAVE ENERGY (a) Do not operate or allow the oven to be operated with the door open. (b) Make the following safety checks on all ovens to be serviced before activating the magnetron or other microwave source, and make repairs if necessary: (1) Interlock operation, (2) Proper door closing, (3) Seal and sealing surfaces (arcing, wear, and other damage), (4) Damage to or loosening of hinges and latches, (5) Evidence of dropping or abuse. (c) Before turning on power to the microwave oven for any service test or inspection within the microwave generating compartments, check the magnetron, wave guide or transmission line, and cavity for proper alignment, integrity, and connections. (d) Any defective or misadjusted components in the interlock, monitor, door seal and microwave generation and transmission systems shall be repaired, replaced, or adjusted by procedures described in this manual before the oven is released to the owner. (e) A microwave leakage check to verify compliance with the Federal performance standard should be performed on each oven prior to release to the owner. TABLE OF CONTENTS PROPER USE AND SERVICE PRECAUTIONS ...2 SPECIFICATIONS ...3 EXTERNAL VIEW...4 INSTALLATION ...4 OPERATIONS AND FUNCTIONS...4 DISASSEMBLY AND ASSEMBLY...5 TROUBLE SHOOTING GUIDE ...33 MEASUREMENT AND TEST ...34 WIRING DIAGRAM...42 PRINTED CIRCUIT BOARD... |
Date | User | Rating | Comment |