Sony HCD-CL3 free download

File name 987385212.pdf

HCD-CL1/CL3 SERVICE MANUAL Ver 1.1 2002. 02 US Model Australian Model HCD-CL1 AEP Model UK Model E Model HCD-CL1/CL3 HCD-CL1/CL3 are the tuner, deck, CD and amplifier section in CHC-CL1/CL3. Photo : HCD-CL1 Model Name Using Similar Mechanism CD SECTION CD Mechanism Type Base Unit Type Optical Pick-up Type TAPE DECK SECTION Model Name Using Similar Mechanism Tape Transport Mechanism Type HCD-DX50 CDM63B BU-30BD60 A-MAX.3 HCD-CL5MD CMAL1Z215B SPECIFICATIONS Amplifier section Other models The following measured at AC 120/220/240 V, 50/ 60 Hz HCD-CL3: DIN power output (Rated): 80 + 80 watts (6 ohms at 1 kHz, DIN) Continuous RMS power output (Reference): 100 + 100 watts (6 ohms at 1 kHz, 10% THD) HCD-CL1: DIN power output (Rated): 40 + 40 watts (6 ohms at 1 kHz, DIN) Continuous RMS power output (Reference): 50 + 50 watts (6 ohms at 1 kHz, 10% THD) Inputs MD IN (phono jacks): voltage 450 mV, impedance 47 kilohms Outputs CD DIGITAL OUT (Supported sampling frequencies: 32 kHz, 44.1 kHz and 48 kHz) PHONES (stereo minijack): accepts headphones of 8 ohms or more. For the U.S. model AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTAL HARMONIC DISTORTION: With 6-ohm loads, both channels driven, from 120 ­ 10,000 Hz; rated 50 watts per channel minimum RMS power, with no more than 10% total harmonic distortion from 250 milli watts to rated output. Total harmonic distortion: less than 0.1% (6 ohms at 1 kHz, 25 W) AEP models HCD-CL3: DIN power output (Rated): 80 + 80 watts (6 ohms at 1 kHz, DIN) Continuous RMS power output (Reference): 100 + 100 watts (6 ohms at 1 kHz, 10% THD) Music power output (Reference): 180 + 180 watts (6 ohms at 1 kHz, 10% THD) HCD-CL1: DIN power output (Rated): 40 + 40 watts (6 ohms at 1 kHz, DIN) Continuous RMS power output (Reference): 50 + 50 watts (6 ohms at 1 kHz, 10% THD) Music power output (Reference): 95 + 95 watts (6 ohms at 1 kHz, 10% THD) -- Continued on next page -- COMPACT HiFi COMPONENT SYSTEM 9-873-852-12 2002B1600-1 © 2002.02 Sony Corporation Home Audio Company Published by Sony Engineering Corporation HCD-CL1/CL3 CD player section System Laser Frequency response Tape deck section Recording system Frequency response Compact disc and digital audio system Semiconductor laser (=780 nm) Emission duration: continuous 2 Hz ­ 20 kHz (±0.5 dB) 4-track 2-channel stereo 40 ­ 13,000 Hz (±3 dB), using Sony TYPE I cassettes SAFETY CHECK-OUT After correcting the original service problem, perform the following safety checks before releasing the set to the customer: Check the antenna terminals, metal trim, "metallized" knobs, screws, and all other exposed metal parts for AC leakage. Check leakage as described below. LEAKAGE The AC leakage from any exposed metal part to earth ground and from all exposed metal parts to any exposed metal part having a return to chassis, must not exceed 0.5 mA (500 microamperes). Leakage current can be measured by any one of three methods. 1. A commercial leakage tester, such as the Simpson 22