File information: | |
File name: | SONY HCD-ZX10D.part1.rar [preview HCD-ZX10D] |
Size: | 2929 kB |
Extension: | |
Mfg: | SONY |
Model: | HCD-ZX10D 🔎 HCDZX10D |
Original: | HCD-ZX10D 🔎 |
Descr: | S.M. |
Group: | Electronics > GSM Mobile Phones |
Uploaded: | 11-04-2009 |
User: | kostake |
Multipart: | 0 1 2 3 4 |
Information about the files in archive: | ||
Decompress result: | OK | |
Extracted files: | 1 | |
File name SONY HCD-ZX10D.pdf HCD-ZX10D SERVICE MANUAL Ver. 1.1 2005.06 E Model Australian Model HCD-ZX10D is the amplifier, disc player, tape deck and tuner section in LBT-ZX10D. This system incorporates Dolby* Digital, Dolby Pro Logic (II) adaptive matrix surround decoder, and the DTS** Digital Surround System. * Manufactured under license from Dolby Laboratories. "Dolby", "Pro Logic", and the double-D symbol are trademarks of Dolby Laboratories. ** Manufactured under license from Digital Theater Systems, Inc. "DTS" and "DTS Digital Surround" are registered trademarks of Digital Theater Systems. Inc. DVD Section Tape deck Section Model Name Using Similar Mechanism DVD Mechanism Type Optical Traverse Unit Name Model Name Using Similar Mechanism Tape Transport Mechanism Type NEW CDM79B-DVBU64 DBU-3 HCD-GN100D CWM43RR35 SPECIFICATIONS Amplifier section The following measured at AC 120, 220, 240 V, 50/60 Hz DIN power output (rated) Front speakers: 140 + 140 watts (6 ohms at 1 kHz, DIN) Center speaker: 55 watts (24 ohms at 1 kHz, DIN) Surround speakers: 140 + 140 watts (6 ohms at 1 kHz, DIN) Continuous RMS power ouput (reference) Front speakers: 180 + 180 watts (6 ohms at 1 kHz, 10% THD) Center speaker: 70 watts (24 ohms at 1 kHz, 10% THD) Surround speakers: 180 + 180 watts (6 ohms at 1 kHz, 10% THD) Inputs PHONO IN (phono jacks): sensitivity 3 mV, impedance 47 kOhms MIC (phone jack): sensitivity 1 mV, impedance 10 kOhms GAME INPUT AUDIO L/R (phono jacks): sensitivity 250 mV, impedance 47 kOhms GAME INPUT VIDEO (phono jack): 1 Vp-p, 75 ohms VIDEO/SAT IN L/R (phono jacks): sensitivity 250 mV/ 450 mV, impedance 47 kOhms Outputs PHONES (stereo phone jack): accepts headphones of 8 ohms or more VIDEO/SAT OUT L/R (phono jacks): voltage 250 mV, impedance 1 kOhm VIDEO OUT (phono jack): max. output level 1 Vp-p, load impedance 75 ohms COMPONENT VIDEO OUT: Y: 1 Vp-p, 75 ohms PB/CB: 0.7 Vp-p, 75 ohms PR/CR: 0.7 Vp-p, 75 ohms S VIDEO OUT (4-pin/mini-DIN jack): Y: 1 Vp-p, unbalanced, Sync negative C: 0.286 Vp-p load impedance 75 ohms SUBWOOFER OUT (phono jack): voltage 250 mV, impedance 1 kOhm SPEAKERS: FRONT L/R, SURROUND L/R: Use only the supplied speaker SS-ZX10D CENTER: Use only the supplied speaker SS-CT381 Disc player section System Compact disc and digital audio and video system Laser Semiconductor laser (DVD: =650 nm, CD: =780 nm) Emission duration: continuous Frequency response DVD (PCM 48 kHz): 2 Hz 22 kHz (±1 dB) CD: 2 Hz 20 kHz (±0.5 dB) Video color system format NTSC, PAL Continued on next page DVD DECK RECEIVER 9-879-053-02 2005F05-1 © 2005.06 Sony Corporation Audio Group Published by Sony Engineering Corporation HCD-ZX10D Ver. 1.1 Tape deck section Recording system Frequency response 4-track 2-channel, stereo 50 13,000 Hz (±3 dB), using Sony TYPE I tapes Notes on chip component replacement · Never reuse a disconnected chip component. · Notice that the minus side of a tantalum capacitor may be damaged by heat. Flexible Circuit Board Repairing · Keep the |
Date | User | Rating | Comment |