danfoss speed controll free download

File name danfoss.pdf

S1X Mobile Microcomputer Technical Information 174 155 POWER SYSTEM 55,75 MODE STATUS 8,5 8,5 10 60,25 9 10 123,5 10,5 AMP Stecker AMP Connector 1 15 29 14 28 42 55 S1X Mobile Microcomputer Technical Information Overview DESCRIPTION The Sauer-Danfoss S1X Mobile Microcomputer is a digital electronic, designed for open loop as well as closed loop mobile off-road system applications. State of art controls in mobile applications driving rotary and linear actuators (hydrostatic transmissions, hydraulic cylinders etc.) are to be more flexible and intelligent. The robust design of the S1X digital electronic series provides best for this. The design provides the required performance for a mobile environment and high performance, 16 bit microcontroller provides the capability for future expansion. It is possible to load several software programs via RS232 interface for various series without any hardware change. This feature makes it possible for an unexperienced operator to use standard hardware for different applications while the appropriate software is selected. The S1X software and hardware is developed for easy communication between the controller. Especially developed tools can be used to optimize the performance during production. This facility simplifies start-up, field service and stock. FEATURES · · · · · · · · Environmentally proofed for mobile applications. Supply voltage 12 VDC or 24 VDC. Software changes without hardware operations. Individual setup per software possible. Visual error output (Blink code for red Error LED). Diagnostic functions and emergency routines. Communication between S1X and Laptop via RS232. Update Software download. TECHNICAL DATA Supply voltage: Battery input current: Sensor voltage: LED outputs: 12 VDC or 24 VDC max. 6,5 A 5 VDC up to 200 mA 2 (under software control). 2 (for internal voltages). All visible from outside the enclosure. Communication: RS232 full buffered. CAN Interface: Optional Specification V2.0 Part B (active). Physical layer: Standard ISO 11898 (High-Speed) Electrical connections: 42pin board-mounted AMP I/O connector. Operation temperature: -40 °C to +70 °C Moisture: Protected against 95 % relative humidity and high pressure wash-downs. Vibration: Random 50 to 2000 Hz for 2 h in each of 3 orthogonal axes at 5.58 g. Shock: 50 g for 11 ms in all 3 axes for a total of 18 shocks. Electrical: The S1X is protected for short circuits to ground. The supply voltage must only be connected to the pins defined in a system connection diagram. Otherwise damage to the controller is possible. Withstands reverse polarity, over voltage, voltage transients, static discharge, EMI/RFI and load dump. © 2002, Sauer-Danfoss Sauer-Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Sauer -Danfoss reserves the right to alter its products without prior notice. This also applies to products already ordered provided that such alterations can be made w