Sony CMD-MZ5 free download

File name CMD-MZ5.pdf

6(59,&( 0$18$/ $(30RGHO 8.0RGHO ______________________________________________________________________________________________________________ SPECIFICATIONS Signalling format Frequency range Dual-Band E-GSM 900 MHz, Transmit: 880 ~ 915 MHz Receive: 925 ~ 960 MHz DCS 1800 MHz, Transmit: 1710 ~ 1785 MHz Receive: 1805 ~ 1880 MHz Class 4 (2W) Class 1 (1W) Pluggable mini SIM card High resolution full graphics display Resolution: 96 x 72 pixels Graphic Icons 5 lines x 12 (normal font numeric) charactors 200 kHz E-GSM: 174 DCS : 374 Transmit frequency drift (synchronized) < ± 0,1 p.p.m GSM: 2W DCS : 1W Standby : 30h - 130h Talk time : 1h30 - 3h40 GSM power class DCS power class SIM chip Display Channel spacing Number of channels Frequency stability RF output power Battery life 3257$%/( ',*,7$/ &(//8/$5 7(/(3+21( :,7+ $&&(6625,(6 Power requirements Operating temperature Accessories operating temperature Battery pack charging temperature Dimensions Weight Supplied accessories 4.0 V (nominal) -10°C to +55°C ± 0°C to +45°C ± 0°C to +40°C 90 x 50 x 30 mm 110 g (with Battery) AC Adapter AC Cable Optional accessories QN-2TC Europe UK Battery Pack A-3627-234-A Desktop Charger 1-476-508-11 Headphones 1-542-459-11 Remote with Microphone 1-476-509-11 Memory Stick A-7094-682-A Carry Bag 3-230-059-01 Optical Audio Cable 1-757-888-11 Analog Audio Cable 1-823-050-11 Cigar Lighter Charger QN-2CC Handsfree kit QN-MZ5HFK EasyCom (SoftModem) QN-2EC PC-Card QN-2PCM Travel Charger QN-2TC Design and specifications are subject to change without notice. This equipment complies with the essential requirements of the Directive 1999/5/EC Radio and Telecommunications Terminal Equipment Directive. NOTE This device contains electrostatically sensitive components. Damage can occur to these components if the appropriate handling is not adhered to. ESD Handling precautions: A working area in which Digital Cellular Telephones may be safely handled without undue risk of damage from electrostatic discharge must be available. The area must be equipped as follows: Ѕ Ѕ Ѕ All working surfaces must have a dissipative bench mat, safe for use with live equipment, connected via 1.2M resistor to a common ground point. A quick release skin contact device with a flexible cord, which has a built-in safety resistor of a range between 5.2K and 1.2M shall be used. The flexible cord must be attached to a dissipative earth point. All containers and storage must be of the conductive type. 2 Batteries: This device contains an internal battery in addition to the external battery pack. These batteries are recyclable and should be disposed of in accordance with national legislation. They must not be incinerated, or disposed of as ordinary rubbish. CAUTION Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Discard used batteries according to the manufacturer's instructions. ADVARSEL! Lithiumbatteri-Eksplosionsf