AD-155-spec free download

File name AD-155-spec.pdf

155W Single Output with Battery Charger(UPS Function) Features : Universal AC input / Full range AD-155 series Protections: Short circuit / Overload / Over voltage Battery low and battery polarity protection Cooling by free air convection 100% full load burn-in test Fixed switching frequency at PFC 67KHz, PWM 134KHz 2 years warranty SPECIFICATION MODEL OUTPUT NUMBER DC VOLTAGE RATED CURRENT CURRENT RANGE RATED POWER OUTPUT VOLTAGE ADJ. RANGE LINE REGULATION LOAD REGULATION SETUP, RISE TIME HOLD UP TIME (Typ.) VOLTAGE RANGE FREQUENCY RANGE POWER FACTOR (Typ.) INPUT EFFICIENCY (Typ.) AC CURRENT (Typ.) INRUSH CURRENT (Typ.) LEAKAGE CURRENT OVERLOAD PROTECTION OVER VOLTAGE BATTERY LOW WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS SAFETY & WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC (Note 4) EMC EMISSION EMC IMMUNITY MTBF OTHERS NOTE AD-155A CH1 13.8V 10.5A 0 ~ 11.5A 151.55W ----------------------------CH2 13.3V 0.5A 0 ~ 0.5A AD-155B CH1 27.6V 5A 0 ~ 5.5A 151.55W 150mVp-p CH1: 24 ~ 29V 1.0% 0.5% 0.5% 2000ms, 90ms/115VAC at full load ----------------------------CH2 27.1V 0.5A 0 ~ 0.5A AD-155C CH1 54V 2.7A 0 ~ 2.7A 156.5W 240mVp-p CH1: 48 ~ 58V 1.0% 0.5% 0.5% ----------------------------CH2 53.5V 0.2A 0 ~ 0.5A RIPPLE & NOISE (max.) Note.2 150mVp-p CH1: 12 ~ 14.5V VOLTAGE TOLERANCE Note.3 2.0% 0.5% 0.5% 24ms/230VAC 88 ~ 264VAC 47 ~ 63Hz PF>0.92 at full load 80% 2.5A/115VAC 1000ms, 90ms/230VAC 20ms/115VAC at full load 124 ~ 370VDC 84% 1.5A/230VAC 40A/230VAC 84% COLD START 20A/115VAC <1mA / 240VAC CH1:105 ~ 135% CH2:0.51 ~ 0.9A rated output power Protection type : AC Charging Mode : Constant current limiting, recovers automatically after fault condition is removed UPS Mode : Protected by internal fuse CH1:31.74 ~ 37.26V CH1:62.1 ~ 72.9V CH1:15.87 ~ 18.63V Protection type : Shut down o/p voltage, re-power on to recover 19.5V(+1.5V,-1V ) 10V 0.8V -10 ~ +60 -20 ~ +85 (Refer to "Derating Curve") , 10 ~ 95% RH 20 ~ 90% RH non-condensing 0.03%/ (0 ~ 50 ) 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes UL60950-1, TUV EN60950-1 approved I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3 Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, light industry level, criteria A 183.3K hrs min. MIL-HDBK-217F (25 199*110*50mm (L*W*H) 0.88Kg; 16pcs/15Kg/0.95CUFT ) 39V 2V DIMENSION PACKING 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. F