Embest STDV912F free download

File name STDV912F.pdf

Embest STDV912F Evaluation Board - Low cost, High-performance ARM9 Evaluation Board for STMicroelectronics STR912FW42 (966E-S) Microcontroller (STR91x series) - RS232, USB device, Ethernet, CAN2.0, LCD, RTC, DMA, Jtag, ... - Plenty of software examples, all in source code Embest STDV912F Evaluation Board Description The STR912FW42 is among the STMicroelectronics STR91xF series ARM-powered microcontrollers, which combines a 16/32-bit ARM966E-S RISC processor core with up to 96Kbytes SRAM, 256Kbytes Main Flash and 32Kbytes 2nd Flash. The ARM966E-S core can perform single-cycle DSP instructions, good for speech processing, audio algorithms, and low-end imaging. The microcontroller is also equipped with USB, CAN, Ethernet, AC motor control, 4 timers, ADC, RTC, DMA and up to 80 GPIO. The rich peripherals set to form an ideal embedded controller for a wide variety of applications such as point-of-sale terminals, industrial automation, security and surveillance, vending machines, communication gateways, serial protocol conversion, and medical equipment. 1 Embest STDV912FTM Evaluation Board is an effective ARM9 platform for STMicroelectronics STR912 microcontroller (MCU) family. The board takes all advantages of STR912FW42 microcontroller and integrates RS232, LEDs, audio, buzzer, test buttons, LCD, Ethernet, CAN2.0, USB device, JTAG interface to create a versatile stand-alone test platform. All 128 pins of the CPU can be extended to meet your development requirements and applications. A plenty of sample programs are provided for this embedded development. Embest also provides development tools for your options including IDE, flash programmer and emulators you may need to help you get your product to market fast. Hardware Specification Dimensions: 149x142mm Working temperature: -40~+85 Celsius Processor: STR912FW42 (966E-S) with (256+32) KBytes internal flash and 96KBytes internal SRAM Power input: +5.0V/1A 10/100M Ethernet interface (CS8900A) USB2.0 interface (Device) CAN2.0 communication interface with CAN driver-chip 2 RS232 ports (UART0 and UART2 can be interconnected to each other for RS232 communication experiment) SSP Interfaces (Flash chip can be plugged in or out or replaced) 2 II-C interfaces LCD interface (16x2 Character LCD) 7 LED indicator lights: one for power, two for network communication indicating, others are general used 8 channel 10-bit ADC and 1 on-board regulators (ADC experiment) 1 buzzer (Jumper JP5 for enabling or disenabling the function) 1 Reset button 1 RTC modification test button (TAMPER) 5 general used keys (3 are used for externel interrupts) ICP & IAP functions 16-bit data bus interface (LCD or any 16-bit data bus interface periph