Samsung Precaution free download

File name Precaution.pdf

1. Safety Instructions 1. Safety Instructions 1-1. Safety Instructions for Service Engineers Make sure to observe the following instructions to operate the product correctly and safely and prevent possible accidents and hazards while servicing. Two types of safety symbols, Warning and Caution, are used in the safety instructions. Warning Hazards or unsafe practices that may result in severe personal injury or death. Caution Hazards or unsafe practices that may result in minor personal injury or property damage. Warning Before Servicing (When servicing electrical parts or harnesses) Make sure to disconnect the circuit breaker or power cable before servicing. Failing to do so may result in a risk of electric shock. Do not allow consumers to connect several appliances to a single power outlet at the same time. There is a risk of fire due to overheating. When removing the power cord, make sure to hold the power plug when pulling the plug from the outlet. Failing to do so may damage the plug and result in fire or electric shock. When the dishwasher is not being used, make sure to disconnect the circuit breaker or power cable from the power outlet. Failing to do so may result in electric shock or fire due to lightning. Do not place or use gasoline, thinners, alcohol, or other flammable or explosive substances near the dishwasher. There is a risk of explosion and fire caused from electric sparks. 1-1 1. Safety Instructions While Servicing Check if the power cable is damaged, flattened, cut or otherwise degraded. If faulty, replace it immediately. Failing to do so may result in electric shock or fire. Completely remove any dust or foreign material from the housing, wiring and connection parts. This will prevent a risk of fire due to arcing and short circuits in advance. When connecting wires, make sure to connect them using the relevant connectors and check that they are completely connected. If tape is used instead of the connectors, it may cause fire due to arcing. Make sure to disconnect the PBA power terminals before starting the service. Failing to do so may result in a high voltage electric shock. When replacing the heater, make sure to fasten the nut after ensuring that it is inserted into the bracket-heater. If not fasten the nut of the heater, it cause water and electric leakage. After Servicing Check for any water leakage. Perform a test run for the dishwasher using the standard(normal)