Samsung 20050617095258859 DJ750 1Disa TM free download

File name 20050617095258859_DJ750_1Disa_TM.pdf

Diassembly and Reassembly 1. Disassembly and Reassembly 1-1 Cabinet-Top * If power is connected ; 1. Turn power on and open the CD - TRAY ,push the Door-CD in the direction of arrow A to remove. 2. Close the CD - TRAY and turn power off, and remove the power plug(cord) from main power 3. Remove 9 screws of ! holding the Cabinet-Top in the direction of arrow B. Lift the back of the Cabinet-Top and shade it to the rear to remove. * If power is not connected ; 1. Remove 9 screws of ! holding the Cabinet-Top in the direction of arrow B. Lift the back of the Cabinet-Top and shade it to the rear to remove. 2. Remove the Cabinet-Top and Turn the Gear the clockwise using the hand as shown in figure 3-1-1. Open the Door-CD and pull the Tray in the direction of arrow @ as shown in figure 3-1-1. 1 TRAY 2 Figure 3-1-1 Figure 3-1 Samsung Electronics 1-1 Diassembly and Reassembly 1-2 CD-Mecha, Door-CD 1. Remove 4 screws of # . 2. Lift the back of the CD-Mecha to remove. Figure 3-2 1-2 Samsung Electronics Diassembly and Reassembly 1-3 Cabinet-Rear 1. Remove 21 screws of $. 2. Lift the Cabinet-Rear in the direction of arrow D and slide it to the rear by releasing the hook of Cabinet-Bottom. Figure 3-3 1-4 Cabinet-Front , Cabinet-Bottom and main PCB 1. Remove3 screws of ^,Cabint-Front in the direction of arrow F and slide to the Cabinet-Bottom. 2. Remove 1 screws of % and slide the Main PCB to te rear to remove. 3. Remove 1 screws of & and slide the AMP PCB and DVD PCD to remove . Figure 3-4 Samsung Electronics 1-3 Diassembly and Reassembly Diassembly and Reassembly 1-5 Pick-up disassembly and reassembly 1-5-1 Disassembly 1-5-2 Assembly 1) Remove the power cable. 1) Replace the Pick-up. 2) Switch LD SW1 on deck PCB to `OFF' before 2) Assemble the deck PCB. removing the FPC 3) Reassemble the deck. ( Inserted into Main PCB CN6. See Fig. 3-5) 3) Disassemble the deck. 4) Disassemble the deck PCB. Note : If the assembly and disassembly are not done in correct sequence, the Pick-up may be damaged. Figure 3-5 1-4 Samsung Electronics