Samsung ASC20141017001 free download

File name ASC20141017001.pdf

SERVICE BULLETIN Product: Dishwasher Bulletin Date: 10/17/2014 ELECTRONICS Bulletin Number: ASC20141017001 Models: DW80H9930US/AA, Subject: Heater damage while using the service DW80H9950US/AA, inspection mode DW80H9970US/AA Issue: If there is no water in the dishwasher when you use the service inspection mode, damage will occur to the heater. Solution: Enter the service inspection mode by pressing the Auto, Delicate, and Power keys at the same time for two seconds. After entering the service inspection mode, all LED's will illuminate for two seconds and then the software version is displayed. After the software version is displayed, press the Auto key to advance to step "n1". DO NOT SKIP STEP n1. During this step, water will fill the tub. If you skip this step and advance to step "n4" you will damage the heater. Please reference the table below and on the next page to utilize the service inspection mode. This information is published for informational purposes only and intended for use only by personnel qualified for the specific tasks depicted. Qualified personnel are those who, based on their training and experience, are capable of identifying risks and avoiding potential hazards when handling or servicing a product. Only qualified personnel should repair products powered by electricity. Any attempt to handle, service or repair the product or products by anyone other than qualified personnel could result in serious injury or death. You agree that your use of and reliance on this information is at your sole risk. This information is subject to change or update without notice. There are no warranties, either expressed or implied, regarding the accuracy or completeness of this information. Note: Consult the Samsung Service Website at (http://.service.samsungportal.com) for the Service Manual and other information on this product. This information is published for informational purposes only and intended for use only by personnel qualified for the specific tasks depicted. Qualified personnel are those who, based on their training and experience, are capable of identifying risks and avoiding potential hazards when handling or servicing a product. Only qualified personnel should repair products powered by electricity. Any attempt to handle, service or repair the product or products by anyone other than qualified personnel could result in serious injury or death. You agree that you