Samsung ASC201408180012 free download

File name ASC201408180012.pdf

SERVICE BULLETIN Product: Dishwasher Bulletin Date: 8/18/2014 ELECTRONICS Bulletin Number: ASC20140818001 Models: DW80H9930US/AA, DW80H9950US/AA, SUBJECT: LE error code or water leak from DW80H9970US/AA under the door Background: Some instances of an LE error code or water leak from under the door are caused by installation errors. Check the installation of the 90 degree elbow on the water valve. Make sure that white Teflon tape has been used and that the elbow is tightened correctly. Also ensure that the water supply line is properly tightened. In addition, check the condition of the drain hose in the back of the dishwasher. Water mark and LE error caused by installation defect. Water mark and LE error caused by installation defect. If the elbow is not connected correctly, water can flow into the Make sure that the water line is shutter under the dishwasher and properly connected. cause an LE error code. Make sure that the clamp Ensure the hose is not is correctly installed. crimped. This information is published for informational purposes only and intended for use only by personnel qualified for the specific tasks depicted. Qualified personnel are those who, based on their training and experience, are capable of identifying risks and avoiding potential hazards when handling or servicing a product. Only qualified personnel should repair products powered by electricity. Any attempt to handle, service or repair the product or products by anyone other than qualified personnel could result in serious injury or death. You agree that your use of and reliance on this information is at your sole risk. This information is subject to change or update without notice. There are no warranties, either expressed or implied, regarding the accuracy or completeness of this information. Solution: If there is no Teflon tape on the elbow where it connects to the valve, install Teflon tape. Tighten the elbow fitting taking care not to over tighten. The elbow fitting should be in the 4 o'clock position to make it easier to connect the water supply line. For the drain hose, make sure the clamp is in the correct position so that