Tektronix 1502B SM free download

File name 1502B_SM.pdf

Service Manual 1502B Metallic Time-Domain Reflectometer 070-6267-04 This document applies for firmware version 5.02 and above. Warning The servicing instructions are for use by qualified personnel only. To avoid personal injury, do not perform any servicing unless you are qualified to do so. Refer to the Safety Summary prior to performing service. First Printing: June 1996 Revised: February 1998 Instrument Serial Numbers Each instrument manufactured by Tektronix has a serial number on a panel insert or tag, or stamped on the chassis. The first letter in the serial number designates the country of manufacture. The last five digits of the serial number are assigned sequentially and are unique to each instrument. Those manufactured in the United States of America have six unique digits. The country of manufacture is identified as follows: B010000 Tektronix, Inc., Beaverton, Oregon, U.S.A. E200000 Tektronix United Kingdom, Ltd., London, England J300000 Sony/Tektronix, Japan H700000 Tektronix Holland, NV, Heerenveen, The Netherlands Instruments manufactured for Tektronix by external vendors outside the United States are assigned a two digit alpha code to identify the country of manufacture (e.g., JP for Japan, HL for Honk Kong, IL for Israel, etc.). Tektronix, Inc., P Box 500, Beaverton, Oregon 97077, USA .O. Printed in U.S.A. Copyright Tektronix, Inc., 1998. All rights reserved. Tektronix products are covered by U.S. and foreign patents, issued and pending. TEKTRONIX and TEK are registered trademarks of Tektronix, Inc. FCC Class A Device This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a commercial environment. This equipment generated, uses, and can radiate radio frequency energy, and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. Op eration of this equipment in a residential area is likely to cause harmful interfer ence, in which case the user will be required to correct the interference at his own expense. Changes or modification not expressly approved by Tektronix can affect emission compliance, and could void the user's authority to operate this equipment. The 1502B Metallic Time Domain Reflectometer was designed and manufactured by: Tektronix, Inc. 100 S.E. Wilson Ave. Bend, Oregon 97702 U.S.A Phone: 1 800 835-9433 Certificate of the Manufacturer/Importer We hereby certify that the Tektronix 1502B Metallic TDR complies with the RF