Keithley 071340200 Jan 2015 free download

File name 071340200_Jan_2015.pdf

8020-MAG-BASE Magnetic Base Keithley Instruments 28775 Aurora Road Installation Guide Cleveland, Ohio 44139 1-800-935-5595 http://www.keithley.com Description The Model 8020-MAG-BASE is a magnetic mounting kit for the Model 8020 High Power Interface Panel. The kit includes an adapter plate, two switchable magnet mounts, and two types of mounting screws. The adapter plate and magnet mounts can be attached to the unit in a variety of ways to create a customized configuration. The Model 8020-MAG-BASE allows you to mount the Model 8020 quickly and rigidly while providing placement flexibility in your testing station. Figure 1: 8020-MAG-BASE accessory installed on Model 8020 071340200 Rev. A / January 2015 *PPA071340200* 1 8020-MAG-BASE Magnetic Base Parts list Part number Description Quantity M6-1X16PFH M6-1 x16 Phillips flat head screw 10 386-7889-00 Magnetic base with switch lever 2 386-7888-00 Plastic adapter plate 1 8-32X3/4PFH #8-32 x 3/4 Phillips flat head screw 4 Figure 2: 8020-MAG-BASE parts illustration 2 071340200 Rev. A / January 2015 8020-MAG-BASE Magnetic Base Dimensions Item number Part number Description Quantity 1 386-7888-00 Plastic adapter plate 1 2 386-7889-00 Magnetic base with switch lever 2 3 M6-1X16PFH M6-1 x 16 Phillips flat head screw 10 4 8-32X3/4PFH #8-32 x 3/4 Phillips flat head screw 4 Figure 3: 8020-MAG-BASE mounting plate and magnet dimensions 071340200 Rev. A / January 2015 3 8020-MAG-BASE Magnetic Base Figure 4: Model 8020 mounting hole dimensions, typical both sides 4 071340200 Rev. A / January 2015 8020-MAG-BASE Magnetic Base Assembly The Model 8020-MAG-BASE can be mounted to either end of the Model 8020 High Power Interface Panel. Before attaching the adapter plate, consider your test station layout and cable routing. The adapter plate can be un-installed and re-installed multiple times. 1. Remove the protective film from both sides of the adapter plate. 2. Position and align the adapter plate against either end of the Model 8020 so that the four smallest screw holes on the plate and fixture are aligned. See the below graphic. Figure 5: Attachment of the adapter plate to the Model 8020 071340200 Rev. A / January 2015