Keithley 24894A(ISO4) free download

File name 24894A(ISO4).pdf

ISO- Keithley MetraByte Corporation *t*** ISO- Manual Part Number: 24094 Revision A Last Edit: 1987 Coptright 0 1987 bv KEITHLEY METRABYTEIASYSTIDAC 440 Myles Standish Boulevard Taunton, Massachusetts 02780 Telephone 508/880-3000 FAX 508/880-0179 WARRANTY INFORMATION All products manufactured by Keithley MetraEIyte are warranted against defective materials and worksmanship for a period of one year from the date of delivery to the original purchaser. Any product that is found to be defective within the warranty period will, at the option of Keithley MetraByte. be repaired or replaced. This warranty does not apply to products damaged by improper use. WAKNlNG Keithley MetraByte assumes no Uabillty for damages consequent to the use of this product. This product is not designed with components of a level of reliability suitable for use in life support or ctitical applicatfons. Information furnished by Keithley MetraByte is believed to be accurate and reliable. However, the Keithley MetraByte Corporation assumes no responsibility for the use of such information nor for any infringements of patents or other rights of third parties that may result from its use. No license is granted by implication or otherwise under any patent rights of Keithley MetraByte Corporation. Keithley MetraByte/Asyst/DAC is also referred to here-in as Keffhky MelraByte. Ba[ilcTM is a trademark of Dartmouth College. IBM@ is a registered trademark of International Business Machines Corporation. PC, XT, AT, P&i/2. and Micro Channel Architecture@ (MCA) are trademarks of International Business Machines Corporation. Microsoft@ is a registered trademark of Microsoft Corporation. Turbo C@ is a registered trademark of Borland International. **IN** ISO- MANUAL TABLE OF CONTENTS CHAPTER ONE - Introduction 1.1 Summary of ISO- Functions 2 CHAPTER TWO - Hardware 2.1 Typical Input Channel Configuration 4 2.2 power Supplies & Cables 2.3 Gain Selection 2.4 Signal & Channel Selection 2.5 Current Measurements 2.6 Open Input Sensor Detection '2.7 Input Filtering 2.8 Input Offset considerations 2.9 Input Offset Trim 2.10 Voltage & Current References 2.11 Using Multiple ISO-4's CHAPTER THREE - Programming 3.1 Channel Selection 10 3.2 Programming with the DAS-8 10 3.3 Thermocouples & other Transducers 11 CHAPTER FOUR - Calibration 13 . CHAPTER FIVE - Specifications 15 1 ISO- Manual