Subject | Text |
Not the logic board | Installed new logic board, still broken |
Service & User manual Philips PM 3632 Logic Analyzer? | Does anyone have any service info, and/or user manuals for the Philips PM 3632 Logic analyzer?
I'm |
|
Re: Service & User manual Philips PM 3632 Logic Analyzer | I have the complete manual of the PM 3632 but I haven't kit pod for you
if you are interesting i |
NEC Home Theater PLA-710 Pro Logic Amplifier | Hello,
Can someone out there help me find a manual or information on this amplifier? I think NEC g |
HELP WITH PWM DRIVE/LOGIC BOARD FOR FOOD BLENDER. | Basically I am messing with a top of the line food blender.....lol.. Rather simple system other tha |
Venner Plug in logic units | I have a box of assorted units and manuals - free to anyone who wants them, about 15 or so. Or they |
Owner of three blown post diagnostic cards requires help... | Owner of three blown post diagnostic cards requires your help...
Problem is that China Inc. actuall |
Code Entry | Why not try disconnecting power from the set and let it "rest" for about five minutes, to |
LG board | Hi,
I have spare LG board 6871QCH013B ( logic).
RGDS |
| Hi minnie,
Thanks for the time invested.
I'll take it off the wall this weekend (sigh) and have a |
samsung hp s5033 plasmahorizontal lines | same problem my logic board has 2 lights one flashes the other on all the time, [email protected] |
Dell 1801fp flat panel monitor power supply problem | My dell monitor just died recently, no power.
I am a beginner at electronic repair hope if someone |
hi help needed | The VCC1V8 supply is switched ON by a Enable1V8 Logic High signal whose Voh(min) = 2.8V, Vol(max)= 0 |
Re: Function of inverter on lcd display | Hi,
The purpose of an inverter is to convert the DC power supply to AC to power the LCD back ligh |
| Power supplies need a signal to turn "on." When you put your set into test mode, the power |
| A Logic Not Circuit or Inverter would do the trick.
It has the opposite output than what is at the |
Increased Volume & Broken TV - Help! | Hi
I have a Toshiba Dolby Pro Logic, Surround TV Model No. 32W8DB.
I turned up the volume to m |
|
| Well for the resistor chain that includes R5, starting at top, 90K then comes 9K, then comes R5, the |
| Hello The_AntiRAM , thanks for your help .........
[quote:5091cfa7b0]Without Service Manual or An |
37MF321D/37 | I just sold the main board to this tv.Ill sell both inverter boards and the logic board for $60.Ive |
| Answer for my previously question about logic board compatibility !!!
The LJ41# is the designatio |
Magnavox 50MF231D/37 Dead | Replaced bad caps in power supply, C8060 & C8059 both 3300uf. Still in shut down. No voltage a p |
Please post service manual for Genicom 3860 | Have to replace the logic board and unable to locate the manual |
Sell Instruments | Miko-Kings Instruments Ltd http://www.miko.com.hk
Miko-Kings Instruments Ltd., hereinafter called |
Update | Checked voltages coming out of power supply all were good except the ones coming out of the cnn64 co |
| First of all cleaning the laser lens won't cure the no-tape run situation, I would check and see if |
samsung no picture and sound but sound when powering up. | hello,can anyone help me with this i have a samsung model 858fh-fb01,when you turn it on |
| All switches were set okay, I tested the aux, tape, and phono plugs bot no sound what so ever.
I |
contact me if you still have it | I have a DP26649 I have a NO power at all situation (main board) problem you probaly have a logic o |
| Digital main or logic board. |