Text preview for : 7jcs.pdf part of panasonic 7jcs panasonic Audio SA-PTX7EB MD0704019CE doc 7jcs.pdf
Back to : 7jcs.pdf | Home
C C C
When importing WMA/MP3 data ( OI page 44), creating a backup ( OI page 82), or restoring backed up data ( OI page 83),
you can connect this unit directly to your PC with a cross LAN cable. When using this connection method, changes to the settings
on this unit and your PC are necessary.
Preparation
1 Connect this unit to the PC with a cross LAN cable (not
included). Settings on the PC
2 To display the picture turn on the television and select the
appropriate video input to suit the connections to this unit. For further information, refer to the operating instructions for
3 Press [ ]. your PC. These instructions are the examples of operating a
PC with Windows XP operating system.
Cross LAN cable
PC (not included) 1 "Control Panel" > "Network Connections" > "Local
Area Connections", then click on "Properties".
2 Click on "Properties" in "Internet Protocol (TCP/IP)".
To LAN terminal To LAN terminal (10/100) 3 Select "Use the following IP address" and set the IP
address and subnet mask.
(100BASE-T or greater)
Note
Settings on this unit Connecting this unit to a PC in the manner described above
may result in temporary loss of Internet connection. When
1 Press [SETUP]. using the Internet, change all the settings listed above back
to the previous settings. You can also use the connection
2 Press [ ] to select "Other Setup" and press C
method described in "Network connection" ( page 94).
[ENTER].
3 Press [ ] to select "Network" and press [ ].
Tips
4 Press [ ] to select "Network Settings" and press To make sure that you can reconnect to a network, we
[ENTER]. recommend taking note of the network setting values used
(IP addresses, Gateway, etc.) before changing any network
5 Press [ ] to select "TCP/IP 1" and press [ENTER]. settings and/or values.
6 Press [ ] to select "IP Manual Setting" and press
[ENTER].
Set "IP Address", "Subnet Mask", and "Gateway".