Text preview for : SM_Tascam-DA-30.pdf part of Tascam DA-30 Service manual Tascam DA-30 (MK 1 - first Version), English, Japanese



Back to : SM_Tascam-DA-30.pdf | Home

Important Information for Service Stations and Customers Page 1 of 1


TECHNICAL INFORMATION
No. 9841
DA-30/DA-P20, Capstan Motor DATE 23rd October 1998




Spares stock of the capstan motor has become very few.

Before placing the spares order, it is strongly requested to perform a cleaning of the oil-less metal
indicated below. Most problem of the capstan motor can be traced to a mechanical friction between
the metal and the capstan shaft.

Rotor is fixed by the magnetic force and can be removed by pulling it out. Take care of that a small
clear washer is located inside. After the cleaning, apply one drop of oil to the oil-less metal.



Oil-less Metal




Rotor
Important Information for Service Stations and Customers Page 1 of 1


TECHNICAL INFORMATION
No. 9920
R-9/10/, DA-30/30MK2/40/45HR, False Cassette Loading DATE 3rd September 1999




Symptom: When a tape is loaded, a machine does not accept it and ejects a cassette automatically.
Cause: Total length of (cassette shell + opened lid) is slightly longer than usual. When such cassette
is loaded, Cassette IN Switch cannot be activated.
Solution: Slightly bend a lever for the Cassette IN Switch as shown below.

Note:
1) Cassette IN Switch is located at No.73-22-04, Fig. 3-17, page 14, DA-30MK2 service manual.
2) This symptom has been confirmed in Japan with following tapes.
maxell R-120DM / TDK R-120 / 3M R-120 / KAO




Bend the lever slightly.