Text preview for : acc-149.pdf part of CANON acc-149 CANON Copiers GP 605 ServBull ServBullGP405 acc-149.pdf
Back to : acc-149.pdf | Home
Service Bulletin COPIER
Issued by Canon Europa N.V.
Model : Finisher D1 No.: Acc-149
(FF-T01-W-000056-01)
DATE: 09.04.99
Location : FEEDING ASSEMBLY
Subject : CORRECTING MISALIGNMENT (DURING SORTING)
Reason : The weight of the trailing edge arms found in the sorting guide assembly can cause an alignment fault
during staple sorting, and the problem can be corrected by providing the measures shown herein
during servcing work.
Details :
During staple sorting, sheets are discharged out of alignment.
The weight of the trailing edge arms in the sorting guide assembly can cause paper to curl downward
during delivery. If the paper is moist, the downward curling will increase, resulting in misalignment
during staple sorting.
Remove two trailing edge arms to reduce the weight imposed on paper. (Remove the inner two of the
four arms.)
Note: Check the parts in stock (middle-level items), and implement measures.
Servicing : < Making Checks and Making Adjustments >
1) If the delivery outlet tray is in the way, change its position.
Fig. 1
-1/2-
Acc-149
2) While holding up the swing guide, remove the inner two of the four screws. At this time, take care
not to drop the screws inside the machine.
3) Of the four trailing edge arms, remove the inner two from the front of the finisher.
Screws (2 pc.)
Remove the inner two of the
four trailing edge arms.
Fig. 2
-2/2-